User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 113
3. Set up handling method of video loss.
4. Check the Enable Video Loss Alarm checkbox.
5. Click Set to set up handling method of video loss.
6. Set arming schedule of the channel.
7. Select Arming Schedule tab to set the channel’s arming schedule.
8. Choose a day of the week, with up to eight time peri
ods within each day.
Click Copy to copy the time period settings to other day(s).
Time periods cannot repeat or overlap.
Figure 151, Set Arming Schedule of Video Loss
9. Repeat the above steps to set arming schedule of other days of the week.
Use Copy to copy an arming schedule to other days.
10. Select Linkage Action tab to set up alarm response action of video loss.
11. Click OK to complete the video loss settings of the channel.
12. Repeat the above steps to finish settings of other channels, or click Copy
to copy the above settings to them.
6.2.2 Detecting Video Tampering
Purpose
Trigger alarm when the lens is covered and take alarm response action(s).
1. Go to Menu > Camera > Video Tampering Detection.