User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 150
• NO-IP: Enter the account information in the corresponding fields.
Refer to the DynDNS settings.
1) Enter Server Address for NO-IP.
2) In the Device Domain Name text field, enter the domain obtained
from the NO-IP Website (www.no-ip.com).
3) Enter the User Name and Password registered in the NO-IP
Website.
• Click A
pply to save and exit the interface.
11.2.4 Configuring NTP Server
Purpose
A Network Time Protocol (NTP) Server can be configured on your DVR to
ensure the system date/time accuracy.
1. Go to Menu > System Configuration > Date/Time.
Figure 199, NTP Settings Interface
2. Check the Enable NTP checkbox to enable this feature.
3. Configure the following NTP settings:
• Interval: Time interval between the two synchronizing actions with
NTP server. The unit is minute.
• NTP Server: IP address of NTP server.
• NTP Port: Port of NTP server.
4. Click Apply to save and exit the interface.