User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 152
3. Select the Mapping Type as Manual or Auto in the drop-down list.
OPTION 1: Auto
If you select Auto, the Port Mapping items are read-only, and the external
ports are set by the router automatically.
1) Click Apply to save the settings.
2) Click R
efresh to get the latest status of the port mapping.
Figure 201, UPnP™ Settings Finished – Auto
OPTION 2: Manual
If you select Manual as the mapping type, you can edit the external port
on demand by clicking to activate the External Port Settings dialog
box.
1) Click to activate the External Port Settings dialog box. Configure
the external port No. for server port, http port and RTSP port respectively.
You can use the default port No. or change it according to actual
requirements.
External Port indicates the port No. for port mapping in the router.
The value of the RTSP port No. should be 554 or between 1024 and
65535, while the value of the other ports should be between 1 and
65535 and the value must be different from each other. If multiple
devices are configured for the UPnP™ settings under the same router,
the value of the port No. for each device should be unique.
Figure 202, External Port Settings Dialog Box
2) Click Apply to save the settings.