User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 153
3) Click Refresh to get the latest status of the port mapping.
Figure 203, UPnP™ Settings Finished – Manual
11.2.6 Configuring More Settings
1. Go to Menu > System Configuration > Network > More Settings.
Figure 204, More Settings Interface
2. Configure the remote alarm host, server port, HTTP port, multicast, and
RTSP port.
• Alarm Host IP/Port: With a remote alarm host configured, the device
will send the alarm event or exception message to the host when an
alarm is triggered. The remote alarm host must have the CMS (Client
Management System) software installed.
The Alarm Host IP refers to the IP address of the remote PC on which
the CMS (Client Management System) software (e.g., iVMS-4200) is
installed, and the Alarm Host Port must be the same as the alarm
monitoring port configured in the software (default port is 7200).