User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 179
Figure 249, Set HDD Property
3. Set the HDD property to R/W, Read-only, or Redundancy.
4. Click OK to save the settings and exit the interface.
In the HDD Information menu, the HDD property will be displayed in the list.
At least two hard disks must be added to your DVR to set an HDD to Redundancy, and
one HDD with R/W property.
14.5 Configuring Quota Mode
Purpose
Each camera can be configured with allocated quota for the storage of recorded files.
1. Go to Menu > System Configuration > HDD > Advanced > Storage Mode.
2. Set the Mode to Quota, as shown below.
The DVR must be rebooted to enable the changes to take effect.