User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 180
Figure 250, Storage Mode Settings Interface
3. Select a camera for which you want to configure quota.
4. Enter the storage capacity in the text field of Max. Record Capacity (GB).
5. You can copy the quota settings of the current camera to other cameras if required.
Click Copy to enter the Copy Camera interface, as shown below.
Figure 251, Copy Settings to Other Camera(s)
6. Select the camera(s) to be configured with the same quota settings. You can also click
the checkbox of Analog to select all cameras.
7. Click OK to finish the Copy settings and return to the Storage Mode interface.
8. Click Apply to apply the settings.
If the quota capacity is set to 0, then all cameras will use the total capacity of the HDD
for record.