User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 42
3.3 Live View Mode Operations
There are many functions provided in Live View mode. The functions are listed below.
• Single Screen: show only one screen on the monitor.
• Multi-screen: show multiple screens on the monitor simultaneously.
• Start Auto-switch: the screen is auto switched to the next one. You must set the dwell
time for each screen on the configuration menu before enabling the auto-switch.
Menu > Configuration > Live View > Dwell Time.
• Start Recording: normal record and motion detection record are supported.
• Output Mode: set the output mode to Standard, Bright, Gentle, or Vivid.
• Playback: play back the recorded videos for the current day.
• Aux/Main Monitor: the DVR checks the output interface connections to define the
main and auxiliary output interfaces. When the aux output is enabled, the main output
cannot perform any operations; you can perform some basic operations on the Live
View mode for the Aux output.
There are two HDMI interfaces. HDMI1 and VGA interfaces share simultaneous output. The
priority level for the main and aux output is HDMI2 > VGA/HDMI1. The CVBS output only
serves as the aux output or Live View output.
Table 1-9 Priorities of Outputs
S.N
.
HDMI2
VGA/HDMI1
CVBS
Main output
Auxiliary output
F
or Live View Outpu
t Only
1
√
√
√
or
×
HDMI2
VGA/HDMI1
CVBS
2
√
or
×
×
√
or
×
HDMI2
CVBS
VGA/HDMI1
3
×
√
√
or
×
VGA/HDMI1
CVBS
HDMI2
For other DVRs with CVBS output, the VGA/HDMI output is the main output, and the CVBS
output is the aux output.
Table 1-10 Priorities of Outputs
S.
N
.
HDMI
VGA
CVBS
Main output
Auxiliary output
1
√
or
×
√
or
×
√
or
×
VGA/HDMI
CVBS
√ means the interface is in use, × means the interface is out of use or the connection
is invalid. HDMI, VGA, and CVBS can be used at the same time.