User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 49
• Full Screen Monitoring Dwell Time: Sets the time in seconds to show the alarm
event screen.
4. Set the camera order.
1) Click the View tab and select Video Output Interface from the drop-down list.
Figure 54, Live View Camera Order
2) Click a window to select it, then double-click a camera to display in the camera list.
Setting an ‘X’ means the window will not display any camera.
3) You can also click
to start live view of all channels in order and click to stop
live view of all channels. Click or to go to the previous or next page.
4) Click Apply.
If the sum of the analog and IP channels exceeds 25, up to 32-window division mode
is supported for the VGA/HDMI1 output.
3.6 Manual Video Quality Diagnostics
Purpose
The video quality of the analog channels can be diagnosed manually and you can view the
diagnostic results from a list.
1. Go to Menu > Manual > Manual Video Quality Diagnostics.
Figure 55, Video Quality Diagnostics