User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 55
Figure 62, PTZ Settings
2. Select patrol No. in the Patrol drop-down list.
3. Click Set to add key points to the patrol.
Figure 63, Key point Configuration
4. Configure key point parameters such as the key point No., duration to
stay at one key point, and patrol speed. The key point corresponds to the
preset. The Key Point No. determines the order the PTZ will follow while
cycling through the patrol. Duration refers to the time span to stay at the
corresponding key point. Speed defines the speed the PTZ will move from
one key point to the next.
5. Click Add to add the next key point to the patrol, or click OK to save the
key point to the patrol.
6. You can delete all the key points by clicking Clear for the selected patrol,
or click Clear All to delete all key points for all patrols.