User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 72
Repeat to set schedule other channels. If the settings can also be used for other
channels, click Copy, and then choose the channel you want to copy to.
7. Click Apply in the Record Schedule interface to save the settings.
5.3 Configuring Motion Detection Recording and Capture
Purpose
Follow these steps to set the motion detection parameters. In Live View mode, once a
motion detection event takes place, the DVR can analyze it and perform many actions to
handle it. Enabling the motion detection function can trigger certain channels to start
recording, or trigger full screen monitoring, audio warning, notifying the surveillance center,
sending e-mail, and so on.
1. Go to Menu > Camera > Motion.
Figure 84, Motion Detection
2. Configure Motion Detection:
1) Choose camera you want to configure.
2) Check the Enable Motion Detection checkbox.
3) Use the mouse to drag and draw the area for motion detection. To set the motion
detection for the entire area shot by the camera, click Full Screen. To clear the
motion detection area, click Clear.