User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual

UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 81

Figure 98, More Settings

3) Check the Redundant Record checkbox.

4) Click OK to save the settings.

5) If the encoding parameters can also be used for other channels, click Copy and

choose the channel you want to apply the settings.

5.9 Configuring HDD Group

Purpose

You can group the HDDs and save the record files in a certain HDD group.

1. Go to Menu > HDD > Advanced > Storage Mode.

. Check whether the storage mode of the HDD is Group. If not, set it to Group.

3. Select General in the left bar.

4. Click to enter editing interface.

5. Configuring HDD group.

1) Choose a group number for the HDD group.

2) Click Apply to save your settings.

3) Click OK to return to the upper level menu.

6. Repeat the above steps to configure more HDD groups.

7. Choose the Channels that you want to save the record files in the HDD group.

1) Go to Menu > HDD > Advanced > Storage Mode.