User Manual

Network Video Recorder User Manual
7
 Up to 6TB storage capacity for each disk supported.
 Supports 8 network disks (NAS/IP SAN disk).
 Supports S.M.A.R.T. and bad sector detection.
 HDD group management.
 Supports HDD standby function.
 HDD property: redundancy, read-only, read/write (R/W).
 HDD quota management; different capacity can be assigned to different channel.
 For DS-9600NI-I8 and DS-9600NI-I16 series, RAID0, RAID1, RAID5, RAID6 and RAID 10 are
supported.
 Hot-swappable RAID storage scheme, and can be enabled and disabled on your demand. And
16 arrays can be configured.
 DS-9600NI-I8, DS-8600NI-I8 and DS-9600NI-I16 series NVR support disk clone to the eSATA
disk.
Recording, Capture and Playback
The capture is supported by I series NVR only.
 Holiday recording schedule configuration.
 Continuous and event video recording parameters.
 Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm
VCA, and POS (for I series NVR only).
 8 recording time periods with separated recording types.
 POS information overlay on image by I series NVR.
 Pre-record and post-record for alarm, motion detection for recording, and pre-record time for
schedule and manual recording.
 Searching record files and captured pictures by events (alarm input/motion detection).
 Tag adding for record files, searching and playing back by tags.
 Locking and unlocking record files.
 Local redundant recording and capture.
 Provide new playback interface with easy and flexible operation.
 Searching and playing back record files by channel number, recording type, start time, end
time, etc.
 Supports the playback by main stream or sub stream. ( I series NVR)
 Smart search for the selected area in the video.
 Zooming in when playback.
 Reverse playback of multi-channel.