User Manual

Network Video Recorder User Manual
8
 Supports pause, play reverse, speed up, speed down, skip forward, and skip backward when
playback, and locating by dragging the mouse.
 Supports thumbnails view and fast view during playback.
 Up to 16-ch synchronous playback at 1080p real time.
 Supports playback by transcoded stream.
 Manual capture, continuous capture of video images and playback of captured pictures.
 Supports enabling H.264+ to ensure high video quality with lowered bitrate.
Backup
 Export video data by USB, SATA or eSATA device (for DS-9600NI-I8, DS-8600NI-I8 and
DS-9600NI-I16 only).
 Export video clips when playback.
 Management and maintenance of backup devices.
 Either Normal or Hot Spare working mode is configurable to constitute an N+1 hot spare
system.
Alarm and Exception
 Configurable arming time of alarm input/output.
 Alarm for video loss, motion detection, tampering, abnormal signal, video input/output
standard mismatch, illegal login, network disconnected, IP confliction, abnormal
record/capture, HDD error, and HDD full, etc.
 POS triggered alarm supported by I series NVR.
 VCA detection alarm is supported.
 VCA search for face detection, vehicle plate, behavior analysis, people counting and heat map.
 Connectable to the thermal network camera. (I series NVR)
 Supports the advanced search for fire/ship/temperature/temperature difference detection
triggered alarm and the recorded video files and pictures (I series NVR)
 Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email
and alarm output.
 Automatic restore when system is abnormal.
Other Local Functions
 Operable by front panel, mouse, remote control, or control keyboard.
 Three-level user management; admin user is allowed to create many operating accounts and
define their operating permission, which includes the limit to access any channel.
 Admin password resetting by exporting/importing the GUID file.
 Operation, alarm, exceptions and log recording and searching.
 Manually triggering and clearing alarms.
 Import and export of device configuration information.