Quick Start Guide

DS-K1T671 Series Face Recognition Terminal
Quick Start Guide
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images
and all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to firmware updates or other
reasons. Please find the latest version of this Manual at the Hikvision website
(hps://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporng
the Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of Hikvision in various
jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS
FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO
EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE
PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR
LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY
RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example,
for device with facial recognion features, biometrics data is stored in your device with
encrypon method; for fingerprint device, only fingerprint template will be saved, which is
impossible to reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance
with the applicable data protecon laws and regulaons, including without limitaon,
conducng security controls to safeguard personal data, such as, implemenng reasonable
administrave and physical security controls, conduct periodic reviews and assessments of the
effecveness of your security controls.
Scan the QR code to get the user manual for detailed informaon.
UD15607B-B
2 Wiring (Normal)
When connecng door contact and exit buon,
the device and the RS-485 card reader should
use the same common ground connecon.
The Wiegand terminal here is a Wiegand input
terminal. You should set the device’s Wiegand
direcon to “input”. If you should connect to
an access controller, you should set the
Wiegand direcon to “Output”. For details, see
the user manual.
The suggested external power supply for door
lock is 12 V, 1 A.
The suggested external power supply for
Wiegand card reader is 12 V, 1 A.
For wiring the fire system, see the user manul.
Do not wire the device to the electric supply
directly.
BTN
(NC)
(COM)
(NO)
Door Contact
10Lux ＞1200Lux100~850Lux
3m
2m
116.5 mm
290 mm
33 mm
1
2
4
1
3
2
Hole1 Hole1
Hole1 Hole1
Hole2
Hole2Hole2
Hole2
Hole3
Recommended Height:1.40 m.
5
5
4
1 Installation
IR Light IR Light USB Interface
White Light
Camera
Screen
Card Presenng Area
Fingerprint Scanner
The figures are for reference only.
Debugging Port
(For debugging only)
Power Interface
Wiring Terminal
PSAM Card Slot
(Reserved)
SIM Card Slot
(Reserved)
Dimension:
Backlight Direct
Sunlight
Direct Sunlight
through Window
Indirect Sunlight
through Window
Close to Light
Installaon Environment:
Indoor and outdoor installaon are supported. if installing the
device indoors, the device should be at least 2 meters away from
the light, and at least 3 meters away from the window or the door.
If installing the device outdoors, you should apply Silicone sealant
among the cable wiring area to keep the raindrop from entering.
Make sure the environment illuminaon is more than 100 Lux.
Before you start:
According to the baseline on the mounng template, sck the mounng template on the wall or other surface, 1.4 meters
higher than the ground.
Make sure the output of external power supply fulfils LPS.
Steps:
Drill holes on the wall or other surface according to the mounng template and install the gang box.
Use two supplied screws(4_KA4x22-SUS) to secure the mounng plate on the gang box.
Use another four supplied screws to secure the mounng plate on the wall.
Route the cables through the cable hole of the mounng plate, and connect to the corresponding external device’s cables.
Apply Silicone sealant among the cable wiring area to keep the raindrop from entering.
3
5
Insert the fingerprint module to the holes at the boom of the main part.
Align the device with the mounng plate and hang the terminal on the mounng plate.
Make sure the two sheets on each side of the mount plate have been in the holes at the back of the
device.
Use two supplied screws (SC-M4x12TP10-SUS) to secure the device and the mounng plate.
The installaon height here is the recommended height. You can change it according to your actual needs.
You can also install the device on the wall or other places without the gang box. For details, refer to the User
Manual.
For easy installaon, drill holes on mounng surface according to the supplied mounng template.
You should purchase the gang box separately.
Apply
Silicone
sealant
Use only power supplies listed in the user instrucons:
Model Manufacturer Standard
C2000IC12.0-24P-DE
C2000IC12.0-24P-GB
ADS-24S-12 1224GPG
MOSO Power Supply Technology Co., Ltd
MOSO Power Supply Technology Co., Ltd
Shenzhen Honor Electronic Co., Ltd
CEE
CEE
BS
Network Interface
GND
87 mm
196.8 mm
Mounng Template
Datum