Manualshelf

Use and Care Manual

ManualsBrandsHilti ManualsPower Tool AccessoriesDD-WCS 10 in. Water Collector System Ring for the WMS 100 Water Management System
12345678910
8 English
5 Before use
5.1 Filling the water and waste material container
1. Open the two catches.
2. Remove the filter bag. → page 10
3.
Fill the water container with water up to the MAX mark.
Note
When the “Water level too high” warning lamp lights, the appliance cannot be operated.
The water and waste material container must be filled for the “Water supply” and “Recycling”
modes.
4. Insert the filter bag. → page 8
5. Fit the top section of the appliance onto the water and waste material container.
6. Close the two catches.
5.2 Fitting the filter bag
Note
A filter must be fitted for the Vacuum cleaner and Recycling modes.
1. Open the two catches.
2. Lift the top section of the appliance away from the water and waste material container.
3. Attach the filter to the filter holder.
4. Fit the top section of the appliance onto the waste material container.
5. Close the two catches.
Printed: 19.07.2017 | Doc-Nr: PUB / 5306586 / 000 / 03