Manualshelf

Use and Care Manual

ManualsBrandsHilti ManualsPower Tool AccessoriesDD-WCS 10 in. Water Collector System Ring for the WMS 100 Water Management System
9101112131415161718
English 11
5. Clean the water and waste material container.
6. Insert the filter bag. → page 8
7. Fit the top section of the appliance onto the waste material container.
8. Close the two catches.
7 Care and maintenance
7.1 Checking the prefilter
1. Remove the filter bag holder.
2. Check whether the prefilter is clogged.
3. If the prefilter is clogged, clean it with fresh water.
Note
Alternatively, a brush or compressed air can be used to clean the prefilter.
7.2 Checking the float level
WARNING! Risk of damage to the equipment or other property.
▶ Check and clean the water level monitoring system at regular intervals. Switch the product off
immediately if signs of damage are found.
1. Remove the filter bag holder.
2. Check that the float is free to move.
3. Clean the float if it does not move freely.
Printed: 19.07.2017 | Doc-Nr: PUB / 5306586 / 000 / 03