Use and Care Manual

6 English
§
“Water level too low” warning lamp
/
“Water level too high” warning lamp
:
“No filter” warning lamp
∙
“Water supply” mode
$
“Vacuum cleaner” mode
£
“Off” mode
|
“Recycling” mode
¡
Control switch
Q
Grip
W
Top section
E
Catch
R
Supply cord hook
3.2 Intended use
The DD-WMS 100 electrically-powered water management system is designed for use with water-cooled
diamond coring machines.
Use the DD-WMS 100 to pick up and collect drilling slurry, to recycle the water and to supply water to
diamond core drilling machines.
This appliance is suitable for commercial use, e.g. in hotels, schools, hospitals, factories, shops, offices and
by rental companies.
The appliance can be operated in the following modes:
• Recycling
Water supply to diamond core drilling machines plus simultaneous vacuum removal and filtering of drilling
slurry.
• Water supply mode
Water supply to diamond core drilling machines without vacuum removal.
• Vacuum cleaner
Small cleaning jobs.
3.3 Items supplied
1 DD-WMS 100 water recycling system, 1 suction and water supply hose set with connectors, 1 filter bag
and 1 operating instructions.
You can find other system products approved for use with your product at your local Hilti Center or online
at: www.hilti.group.
3.4 Control switch
Status Meaning
Off
Recycling mode
Water supply mode
Vacuum cleaner mode
3.5 Indicators
LED Meaning
The water level is too low.
Fill the water and waste material container up to the MAX mark.
The water level is too high.
Switch to water supply mode until the indicator goes out.
Printed: 19.07.2017 | Doc-Nr: PUB / 5306586 / 000 / 03