Use and Care Manual

English 9
5.3 Connecting the hose set to the diamond coring machine
1. Connect the suction hose to the suction hose inlet fitting.
2. Connect the water supply hose to the water supply hose outlet fitting.
3. Connect the other end of the suction hose to the water collector of the diamond core drilling machine.
Note
Use the tapered adapter if necessary.
4. Connect the other end of the water supply hose to the diamond core drilling machine.
6 Operation
6.1 Switching the appliance on
CAUTION
Risk of injury through incorrect operation.
▶ The appliance may be operated only by authorized, trained personnel. This personnel must be
specially informed of any possible hazards.
WARNING
Risk of hazards through use of the product not as directed.
▶ This appliance is not suitable for picking up hazardous dust.
CAUTION
Risk of hazards through use of the product not as directed.
▶ Use the power outlet on the appliance only for the purposes described in these operating
instructions.
WARNING! Risk of damage to the equipment or other property.
▶ Switch the product off immediately if foam or liquid escapes from it.
WARNING
Danger of electric shock! Carrying out care and maintenance while the supply cord is connected to
the power outlet presents a risk of serious injuries including burns.
▶ Always unplug the supply cord before carrying out all care and maintenance tasks.
1. Connect the hose set to the diamond coring machine. → page 9
2. Set the control switch to the desired operating mode.
Printed: 19.07.2017 | Doc-Nr: PUB / 5306586 / 000 / 03