Use and Care Manual

ManualsBrandsHilti ManualsPower Tool AccessoriesB 22-Volt/8.0 Amp Lithium-Ion High Performance Industrial Battery Pack

Hilti Li-Ion Battery

2194438

Instructions for Use and Operation

This documentation uses the term battery to describe rechargeable Hilti Li-Ion battery packs containing

several Li-Ion cells joined together. These batteries are to be used in Hilti power tools exclusively. When

using Hilti power tools, use Hilti original battery packs!

Hilti batteries are state of the art and are equipped with cell management and cell protection systems.

Description

The batteries are composed of cells that contain lithium-ion storage materials that are capable providing

high specific energy density. Unlike NiMH and NiCd batteries, Li-Ion batteries have a minimal memory

effect, but they are extremely susceptible to external impact, deep discharge, and high temperatures.

See Safety WARNING

Find our battery-powered products at your Hilti Store or at:

www.hilti.group | USA: www.hilti.com

Safety

WARNING

Danger through improper use! Risk of damaging the battery.

▶ Treat batteries with care in order off prevent damage or leakages which can severely damage your

health! Observe the following safety precautions for the safe handling and use of Li-ion power tools

batteries. Failure to follow can result in skin irritation, severe corrosive injury, chemical burns, fire, or

explosion.

▶ Batteries must not be modified or tampered with!

▶ Never use recycled or repaired batteries conducted by non-Hilti companies.

▶ Do not use or charge batteries that have suffered mechanical impact, have been dropped from a

height or show signs of damage. Examine your batteries regularly for signs of damage, such as

shredding, cuts or punctures.

▶ Never use the battery or a battery-operated power tool as a hammer.

▶ Avoid eye or skin contact with leaking liquids!

➥

See (What to do in case of damaged batteries).

▶ Damaged batteries can leak fluid which may moisten adjacent objects. Clean these objects with

warm soapy water and replace the damaged batteries.

➥

See (What to do in case of damaged batteries).

▶ Never expose batteries to elevated temperature, sparking, or an open flame because the battery may

explode.

▶ Do not touch the battery poles with your fingers, tools, jewelry, or other metallic objects because this

may cause a short circuit, electrical shock, burns or explosions.

▶ Keep batteries away from rain or moisture. Penetrating moisture can cause short circuits, electrical

shock, burns or explosions.

▶ Only use chargers and power tools approved for the specific battery type. Read and follow the

instructions in the respective user manuals.

▶ Do not store or use the battery in explosion-prone environments containing combustible liquids or

gases. An unexpected battery malfunction can cause an explosion under those conditions.

What to do in case of damaged batteries

▶

If a Hilti battery is found to be damaged, contact your Hilti service partner.

▶ If a battery is leaking, use safety goggles and gloves to avoid direct eye or skin contact.

Printed: 05.07.2019 | Doc-Nr: PUB / 5371989 / 000 / 03

Summary of content (3 pages)

PAGE 1
Hilti Li-Ion Battery 2194438 Instructions for Use and Operation This documentation uses the term battery to describe rechargeable Hilti Li-Ion battery packs containing several Li-Ion cells joined together. These batteries are to be used in Hilti power tools exclusively. When using Hilti power tools, use Hilti original battery packs! Hilti batteries are state of the art and are equipped with cell management and cell protection systems.
PAGE 2
Hilti Li-Ion Battery 2194438 ▶ To store a damaged battery, place the battery in a non-flammable container and cover the battery with dry sand, chalk powder (CaCO3) or silicate (Vermiculite). Then, close the lid air-tight and store the container away from flammable gases, liquids, or objects. ▶ Dispose of the container at your Hilti Store, or consult your local governmental garbage disposal or public health and safety resources for disposal instructions. DO NOT ship or mail any damaged batteries.
PAGE 3
Hilti Li-Ion Battery 2194438 ▶ Store batteries in a cool and dry place. Cool storage will increase battery life. ▶ Batteries should not be sent through the mail. Consult your shipper for instructions on how to ship undamaged batteries. ▶ Do not transport batteries in bulk, loosely packaged. During transport, batteries should be protected from excessive shock and vibration and isolated from any conductive materials or other batteries that may come in contact with the terminals and cause a short circuit.