Use and Care Manual

10 English
3.7 Saw blade brake
DSH 600-X
The product is equipped with an integrated saw blade brake to increase operator safety.
The saw blade is braked to a standstill in a maximum of 10 seconds after the throttle safety grip is released.
Releasing the throttle safety grip when the tool is running at full speed causes the tool to flick forward
slightly because of the braking torque. So hold the tool firmly with both hands on the grips provided.
3.8 Consumables and wearing parts
• Air filter
• Cord (5 pcs)
• Starter
• Fuel filter
• Spark plug
• Tool set
• Cylinder set
• Mounting screw assy.
• Flange for abrasive cutting disc (with integral centering ring 20 mm/1")
• Flange for diamond cutting disc (with integrated centering ring 20 mm/1")
4 Technical data
4.1 Gasoline-powered cut-off saw
DSH 600 DSH 600-X
Cubic capacity
3.86 in³
(63.3 cm³)
3.86 in³
(63.3 cm³)
Weight with diamond disc flange, without cutting disc, tank
empty
21.50 lb
(9.75 kg)
21.72 lb
(9.85 kg)
Rated power at 8,500/min in accordance with ISO 7293
4.3 hp
(3.2 kW)
4.3 hp
(3.2 kW)
Maximum spindle speed
5,500 /min 5,500 /min
Maximum cutting depth
4.7 in
(120 mm)
4.7 in
(120 mm)
Carburetor
Walbro; model:
WT-1207
Walbro; model:
WT-1203
4.2 Additional technical data
Engine type
Single-cylinder, air-cooled two-
stroke engine
Maximum engine speed
9350 ± 200 /min
Idle speed
2900 ± 200 /min
Ignition (type)
Electronic
Electrode gap
0.02 in
(0.5 mm)
Spark plug
NGK, type: CMR7A-5
Tightening torque for fitting the spark plug
9 ftlb
f
(12 Nm)
Fuel mixture
API-TC oil 2% (1:50)
Tank capacity
870 cm³
Tank capacity
29.4 oz
Printed: 24.05.2018 | Doc-Nr: PUB / 5341998 / 000 / 02