Use and Care Manual

8 English
5.1 Removing the battery
1. Press the two release buttons and hold them in the pressed position.
2. Pull the battery out of the product to the rear.
5.2 Removing the saw blade
1. Activate the transport lock or separate the battery from the power tool.
2. Push the locking lever up as far as it will go and hold it in this position.
3. Pull the blade forward out of the blade holder.
4. Allow the locking lever to return to its original position.
5.3 Replacing the contact shoe
1. Remove the battery. → page 8
Printed: 23.01.2018 | Doc-Nr: PUB / 5396155 / 000 / 00