Use and Care Manual

English 9
2. Remove the saw blade. → page 8
3. Press the contact shoe lock button.
4. Pull the contact shoe out.
5. Press the contact shoe lock button.
6. Insert the lightly greased contact shoe into the guide to the desired position.
The contact shoe can be used in three positions.
7. Check that the contact shoe has engaged.
8. Insert the saw blade. → page 9
5.4 Installing the dust removal adapter (accessory)
1. Pull the contact shoe out.
2. Set the dust removal adapter on the contact shoe mount.
3. Insert the lightly greased contact shoe fully into the guide.
5.5 Installing the scaffold hook (accessory)
1. Engage the transport lock.
2. Install the scaffold hook.
5.6 Inserting the saw blade
Use only saw blades with a 1/2" connection end.
Printed: 23.01.2018 | Doc-Nr: PUB / 5396155 / 000 / 00