Use and Care Manual

12 English
Trouble or fault Possible cause Action to be taken
The saw blade can’t be re-
moved from the chuck.
The locking lever was not pushed
as far as it will go.
▶ Push the locking lever as far as
it will go and remove the saw
blade.
8.2 The reciprocating saw is operational.
Trouble or fault Possible cause Action to be taken
The tool does not achieve full
power.
The control switch is not fully
pressed.
▶ Press the control switch fully.
The battery is discharged. ▶ Change the battery and charge
the empty battery.
The saw blade can’t be re-
moved from the chuck.
The locking lever was not pushed
as far as it will go.
▶ Push the locking lever as far as
it will go and remove the saw
blade.
9 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
Battery disposal
Improper disposal of batteries can result in health hazards from leaking gases or fluids.
▶ DO NOT send batteries through the mail!
▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
▶ Dispose of your battery out of the reach of children.
▶ Dispose of the battery at your Hilti Store, or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
10 Manufacturer’s warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
Printed: 23.01.2018 | Doc-Nr: PUB / 5396155 / 000 / 00