Use and Care Manual

English 5
3.5 Liion battery status indicator
The charge state of the Li-ion battery and malfunctions of the power tool are indicated by the indicator of
the Liion battery. Press either of the battery release buttons to check the charge state of the LiIon battery.
Status Meaning
4 LEDs light up. • Charge state: 75 % to 100 %
3 LEDs light up. • Charge state: 50 % to 75 %
2 LEDs light up. • Charge state: 25 % to 50 %
1 LED lights up. • Charge state: 10 % to 25 %
1 LED flashes. • Charge state: < 10 %
1 LED flashes, the power tool is not in working or-
der.
• The battery has overheated or is completely
discharged.
4 LEDs flash, the power tool is not in working or-
der.
• The power tool is overloaded or has overheated.
Note
Battery charge state cannot be indicated while the control switch is pressed and for 5 seconds after
the control switch has been released. If the LEDs of the charge state indicator flash, follow the
instructions in the 'Troubleshooting' section.
3.6 Items supplied.
Bandsaw, operating instructions.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.com
4 Technical data
4.1 Bandsaw
SB 4-A22
Rated voltage
21.6 V
Ambient temperature
1 ℉ … 140 ℉
(−17 ℃ … 60 ℃)
Weight
9 lb
(4 kg)
No-load speed
548 ft/min
(167 m/min)
Max. cutting depth
2.50 in
(63.5 mm)
Dimensions, bandsaw blade (Length x width x thickness)
28.875 in x 0.05 in x 0.02 in
(733 mm x 12.7 mm x 0.5 mm)
5 Operation
5.1 Safe operation 4
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Remove the battery before making any adjustments to the power tool or before changing
accessories.
▶ Press and hold down the two release buttons.
Printed: 12.06.2017 | Doc-Nr: PUB / 5310775 / 000 / 03