User manual

ORIGINAL OPERATING INSTRUCTIONS
TE 7 rotary hammer
It is essential that the operating instructions
are read before the power tool is operated for
the first time.
Always keep these operating instructions to-
gether with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to other
persons.
Contents Page
1 General information 13
2Description 14
3 Insert tools, accessories 16
4 Technical data 16
5 Safety instructions 17
6Beforeuse 19
7 Operation 20
8 Care and maintenance 21
9 Troubleshooting 22
10 Disposal 22
11 Manufacturer’s warranty - tools 23
12 EC declaration of conformity (original) 23
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation “the
power tool” always refers to the TE 7 rotary hammer.
Operating controls and parts 1
@
Chuck
;
Function selector switch
=
On / off switch
%
Forward / reverse switch
&
Side handle with depth gauge
(
Interface for TE DRS‑M dust removal attachment
)
Supply cord
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
seriousbodilyinjuryorfatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning:
electricity
Warning: hot
surface
en
13
Printed: 08.07.2013 | Doc-Nr: PUB / 5071130 / 000 / 01