User manual

3 Insert tools, accessories
Designation Description
Chuck TE‑C Click
Hammer drill bits ∅ 4…24 mm
Lightweight percussion core bits ∅ 25…68 mm
Multipurpose hole saws ∅ 25…68 mm, hexagonal
Anchor-setting tools C-type connection end
Quick-release chuck for wood and metal drill bits For smooth or hex. shank
Key-type chuck For smooth or hex. shank
Wood drill bits ∅ 5…20 mm
Metal drill bits ∅ 5…13 mm
Metal drill bits / stepped drill bits ∅ 5…22 mm
Designation
Short designation
Description
Dust removal attachment TE DRS-M
Angular chuck C-type connection end
Angular chuck TE‑AC1
Keyless chuck
Bit holder
4 Technical data
Right of technical changes reserved.
NOTE
The power tool is available in various voltage ratings. Please refer to the power tool’s type identification plate for
details of its rated voltage and rated input power.
Rated
voltage
100 V 110 V 120 V 127 V 220 V 230 V 240 V
Rated
power
input
670 W 710 W 710 W 710 W 710 W 710 W 710 W
Rated cur-
rent input
7.2A 6.9A 6.3A 6.0A 3.4A 3.3A 3.2A
Rated fre-
quency
50/60 Hz 50/60 Hz 60 Hz 60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
Power tool TE 7
Weight in accordance with EPTA procedure 01/2003 2.9 kg
Dimensions(LxWxH) 320mmx75mmx215mm
Speed under no load 0…1,050/min
Hammer drilling speed 860/min
Single impact energy in accordance with EPTA proced-
ure 05/2009
1.8 J
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
giveninEN60745andmaybeusedtocompareonetoolwithanother.Itmaybeused for a preliminary assessment
en
16
Printed: 08.07.2013 | Doc-Nr: PUB / 5071130 / 000 / 01