S-BT Threaded Fastener Specification
Table Of Contents
- 1.1 Definition
- 1.2 The S-BT system
- 1.3 Fastening mechanism
- 1.4 S-BT system features and benefits – simplified fastening to steel
- 2.1 Grating fastening system
- 2.2 Grating fastening system X-FCS-R
- 2.3 S-BT with MM and MQ installation channel system
- 2.4 Fastening instrumentation, junction boxes and lighting
- 2.5 Fastening cable / conduit connectors
- 2.5 Fastening cable tray supports
- 2.7 Electrical connections
- 3.1 Product data
- 3.2 Load data
- 4.1 Instruction for use - S-BT-MF M6, M8, M10, W6, W10
- 4.2 Instruction for use - S-BT-MF M8/7 AN 6
- 4.3 Instruction for use - S-BT-MR M6, M8, M10, W6, W10 SN 6
- 4.4 Instruction for use - S-BT-MR M8/7 SN 6
- 4.5 Instruction for use - S-BT-MR M6, M8, M10, W6, W10 SN 6 AL
- 4.6 Instruction for use - S-BT-MR M8/7 SN 6 AL
- 4.7 Instruction for use - S-BT-GF M8/7 AN 6
- 4.8 Instruction for use - S-BT-GR M8/7 SN 6
- 4.9 Instruction for use - S-BT-GR M8/7 SN 6 AL
- 4.10 Instruction for use – S-BT-EF M6/W6/M8
- 4.11 Instruction for use – S-BT-EF M10/W10
- 4.12 Instruction for use – S-BT-ER M6/W6/M8
- 4.13 Instruction for use – S-BT-ER M10/W10
- 4.14 Instruction for use – S-BT-EF W10 HC AWG2/0 and S-BT-EF M10 HC 35/120
- 4.15 Instruction for use – S-BT-ER W10 HC AWG2/0 and S-BT-ER M10 HC 35/120
- 5.1 Nomenclature and symbols
- 5.2 Design concepts
- 5.3 Static capacity of the S-BT threaded stud
- 5.4 Vibration effects on S-BT threaded stud fastenings
- 5.5 Resistance of S-BT fastenings under dynamic tensile loading
- 5.6 Effect of S-BT threaded stud fastenings on the fatigue strength of base material structural steel
- 5.7 Influence of glue coatings on the loosening torque
- 5.8 S-BT-ER and S-BT-EF screw-in threaded studs for electrical connections
- 5.9.5 Conductivity disc of S-BT-ER / -EF electrical connectors
- 5.9.4 Stainless steel S-BT studs
- 5.9.3 Carbon steel S-BT studs
- 5.9.2 Galvanic (contact) corrosion
page 2 Specifications
1. Introduction
1.1 Denition 5
1.2 TheS-BTsystem 5
1.2.1 S-BTfasteneranddesignation 5
1.2.2 Drilling tool 6
1.2.3 Stepped drill bit 6
1.2.4 Installation tool 7
1.2.5 S-DGdepthgaugewithaS-CCcalibrationcard 7
1.2.6 Installationtemperatureandservicetemperature 8
1.3 Fasteningmechanism 8
1.4 S-BTsystemfeaturesandbenets–simpliedfasteningtosteel 9
2. Applications
2.1 GratingfasteningsystemX-FCMandX-FCMNG 10
2.2 GratingfasteningsystemX-FCS-R 13
2.3 S-BTwithMMandMQinstallationchannelsystem 14
2.4 Fasteninginstrumentation,junctionboxesandlighting 15
2.5 S-BTwithHiltistandoffadapter:Fasteninginstrumentation,junctionboxes,lighting,installationchannelsystemsetc. 16
2.5.1 Fasteningtosteelwithapassivereprotection(PFP)coating 16
2.5.2 Fasteningtoinsulatedsteelmemberse.g.insulatedbulkheads 17
2.6 Fasteningcable/conduitconnectors 18
2.7 Fasteningcabletraysupports 18
2.8 Electricalconnections 19
2.8.1 Functionalbondingandterminalconnectioninacircuit 20
2.8.2 Protectivebondingcircuit 21
2.8.3 Lightningprotection 22
3. Technical Data
3.1 Productdata 23
3.1.1 S-BTmaterialspecicationsanddimensions 23
3.1.2 HiltiCouplermaterialspecicationsanddimensions 24
3.1.3 Standoffadaptermaterialspecicationsanddimensions 24
3.1.4 Drillingtool,settingtool,accessoriesandinserts 25
3.2 Load data 26
3.2.1 Recommended loads 26
3.2.2 Design loads 27
3.2.3 RecommendedloadsS-BTwithHiltistandoffadapter 28
3.2.4 DesignloadsS-BTwithHiltistandoffadapter 29
Content Page