S-BT Threaded Fastener Specification
Table Of Contents
- 1.1 Definition
- 1.2 The S-BT system
- 1.3 Fastening mechanism
- 1.4 S-BT system features and benefits – simplified fastening to steel
- 2.1 Grating fastening system
- 2.2 Grating fastening system X-FCS-R
- 2.3 S-BT with MM and MQ installation channel system
- 2.4 Fastening instrumentation, junction boxes and lighting
- 2.5 Fastening cable / conduit connectors
- 2.5 Fastening cable tray supports
- 2.7 Electrical connections
- 3.1 Product data
- 3.2 Load data
- 4.1 Instruction for use - S-BT-MF M6, M8, M10, W6, W10
- 4.2 Instruction for use - S-BT-MF M8/7 AN 6
- 4.3 Instruction for use - S-BT-MR M6, M8, M10, W6, W10 SN 6
- 4.4 Instruction for use - S-BT-MR M8/7 SN 6
- 4.5 Instruction for use - S-BT-MR M6, M8, M10, W6, W10 SN 6 AL
- 4.6 Instruction for use - S-BT-MR M8/7 SN 6 AL
- 4.7 Instruction for use - S-BT-GF M8/7 AN 6
- 4.8 Instruction for use - S-BT-GR M8/7 SN 6
- 4.9 Instruction for use - S-BT-GR M8/7 SN 6 AL
- 4.10 Instruction for use – S-BT-EF M6/W6/M8
- 4.11 Instruction for use – S-BT-EF M10/W10
- 4.12 Instruction for use – S-BT-ER M6/W6/M8
- 4.13 Instruction for use – S-BT-ER M10/W10
- 4.14 Instruction for use – S-BT-EF W10 HC AWG2/0 and S-BT-EF M10 HC 35/120
- 4.15 Instruction for use – S-BT-ER W10 HC AWG2/0 and S-BT-ER M10 HC 35/120
- 5.1 Nomenclature and symbols
- 5.2 Design concepts
- 5.3 Static capacity of the S-BT threaded stud
- 5.4 Vibration effects on S-BT threaded stud fastenings
- 5.5 Resistance of S-BT fastenings under dynamic tensile loading
- 5.6 Effect of S-BT threaded stud fastenings on the fatigue strength of base material structural steel
- 5.7 Influence of glue coatings on the loosening torque
- 5.8 S-BT-ER and S-BT-EF screw-in threaded studs for electrical connections
- 5.9.5 Conductivity disc of S-BT-ER / -EF electrical connectors
- 5.9.4 Stainless steel S-BT studs
- 5.9.3 Carbon steel S-BT studs
- 5.9.2 Galvanic (contact) corrosion
Specifications page 7
S-BT Screw-in threaded studs
1.2.4 Installation tool
Designation Item Description Application
SBT 4-A22 UCD tool Drilling / Setting
SF 4-A22 UCD tool Setting
SFC 22-A
(B22/2.6or5.2Ah)
UCD tool Setting
SFC18-A
(B18/2.6or5.2Ah)
UCD tool Setting
Fortheinstallationprocess,arecommendedtorqueupto13Nmisneeded.The
cordlessdrilldriversSBT4-A22,SF4-A22,SFC22-AandS-FC18-Afulllthe
requirementsfortheinstallationprocess.
1.2.5 S-DG depth gauge with a S-CC calibration card
Designation Item Description Application
S-DGBTM8/7Short6 DepthgaugeforS-BTM8/7_N6 Setting
S-DGBTM8/15Long6 DepthgaugeforS-BTM8/15_N6 Setting
S-DGBTM10-W10/15
Long 6
DepthgaugeforS-BTM10/W10_N6 Setting
S-DGBTM10-W10HC6 DepthgaugeforS-BTM10/W10HC_ Setting
S-CC BT 6
Calibration card for calibration of the
depthgauge(short/longstuds)
Calibration
S-CC BT HC 6
Calibration card for calibration of the
depthgaugeforS-BTM10/W10HC_
Calibration
S-CGBT/7Short6
Checkgaugeforvericationofthe
stand-offforshortstuds(7mm)
Verication
S-CGBT/15Long6
Checkgaugeforvericationofthe
stand-offforlongstuds(15mm)
Verication
S-CGBTHC
Checkgaugeforvericationofthe
stand-offforS-BTM10/W10HC_
Verication
Inordertoensuretheexactscrew-indepthandapropercompressedsealing
washer,theS-BTstudshavetobeinstalledwiththeappropriatedepthgauge.
Withthistoolthescrew-indepthcanbeadjustedinarangeof0–1.5mm(3steps,
0.5mmperstep).
TheS-CCBTcalibrationcardisneededtochecktheinitialstandoffoftheS-BT
stud(ensuretheproperscrew-indepth)andtoadjust/calibratetheS-DGdepth
gauge.AfterndingtherightadjustmentlevelfortheS-DGdepthgauge,thegauge
canbeadjustedandthestudscanbeinstalledwithoutadditionalcheckofthe
S-DGdepthgauge.
Thedepthgaugehastobere-adjusted(calibrated)atfollowingtimes:
• Start of the installation process
•Changeoftheworkingposition(upwards,downwards,horizontal)
andbasematerial(thickness,strength,type)
• Installer change
•Aftereachpackagingrespectivelyaftertheinstallationof100S-BTstuds
Section4comprisestheinstructionsforuse(IFU)oftheS-BTstudswithadetailed
illustrationhowtousetheS-DGdepthgaugeandtheS-CCcalibrationcard.The
installerisresponsibleforthecorrectsettingoftheS-BTstuds.Fortheperiodical
vericationofthecorrectstudstandofftheS-CGBTcheckgaugecanbeused.
ThelifetimeoftheS-DGBTdepthgaugeis≥1000settings.
HiltiUCDSFC22-A(cordless)
Designandfunctionalityofthe
mechanical calibration card S-CC BT
6)%7$
D
E
F
6)%7$
76%76
6)&$
6'*%70:/RQJ
6'*%70/RQJ
6'*%70:/RQJ
6&&%7
D
616&ö 0
616
&ö:
616&ö0
616&ö0
616
&ö:
PP
õ
PP
PP
PP
PP
1P
IWOE
7RUTXHWRRO;%7õ
1PIWOE
6%70)0$1
6%70):$1
6%70)0$1
6%70)0$1
6%70):$1
E
6)&$
6)&$
F
1P
6)&$
$
$
6%70)000
6%70)::
D
E
[
[
+H[QXWZLWKIODQJH0)
+H[QXWZLWKIODQJH:)
+H[QXWZLWKIODQJH0)
+H[QXWZLWKIODQJH0)
+H[QXWZLWKIODQJH:)
6'*%70:/RQJ
6'*%70/RQJ
6'*%70:/RQJ
Designandfunctionalityof
thecheckgaugeS-CGBT
S-DGBTmechanicaldepthgauge