Installation Guide

assembly instructions
Family: Casa Item No. 4308 OL
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body, installing the mounting hardware, making all necessary electrical
connections, hanging the fixture from the ceiling and then installing the glass.
start here
4308
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer to the hanging instruction sheet (I.S.19) provided to complete installation
of this fixture.
Drawing 2 - Assembly
12.15.08
1. Remove socket ring (4) from socket (C) - see Drawing 2.
2. Slip glass (5) over socket (C).
3. Thread socket ring (4) onto socket (C) and tighten to secure glass.
4. Fixture can now be lamped accordingly.
1. Rotate the uprights (A), of the main body structure (1) until they are equally spaced
45 degrees apart - see Drawing 1.
2. Slip holes in ring (2) over studs (B) located on the bottom of uprights (A) - see
Drawing 2.
3. Thread on ball knobs (3) to secure ring (2) to fixture.
3
4
1
2
5
3
C
B
A
Drawing 1 - Fixture Assembly
A
A
A
A
A
A
A
A
45º
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com