Installation Guide

HINKLEY LIGHTING 12600 Berea Road Cleveland, OH 44111 800.446.5539 / 216.671.3300 www.hinkleylighting.com

assembly instructions

Family: Meridian Item No. 3875 BN

1. Find a clear area in which you can work.

2. Unpack ﬁxture and glass from carton.

3. Carefully review instructions prior to assembly.

*** The construction of this ﬁxture will be accomplished by ﬁrst assembling the main

body of the ﬁxture, making all necessary electrical connections, hanging the ﬁxture

from the ceiling, and then installing the glass.

start here

3875

Note: Maximum wattage for 3875 ﬁxture is 60 watts per G9 bulb.

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

1. To assemble main body, spread arms (A) located on the main body assembly (1), until

they are equally spaced 72 degrees apart - see Drawings 1 & 2.

2. Please refer to the hanging instruction sheet (I.S. 19-90) provided to hang ﬁxture.

Then refer back to this sheet to install glass.

1. To install glass, remove socket ring (2) from socket (B) - see Drawing 2.

2. Slip glass (3) over socket (B).

3. Thread socket ring (2) onto socket (B) to secure glass (3).

4. Fixture can now be lamped accordingly.

5. Thread bulb shield (4) onto socket until snug.

Drawing 1 - Assembly

Drawing 2 - Glass Installation

72 degrees

apart

9.28.09

PAGE 1
Family: Meridian Drawing 1 - Assembly 3875 assembly instructions Item No. 3875 BN s tart here 72 degrees apart 1. Find a clear area in which you can work. 2. Unpack fixture and glass from carton. 3. Carefully review instructions prior to assembly. Drawing 2 - Glass Installation *** The construction of this fixture will be accomplished by first assembling the main body of the fixture, making all necessary electrical connections, hanging the fixture from the ceiling, and then installing the glass.