Installation Guide

H I N K L E Y L I G H T I N G 12600 Berea Road Cleveland, OH 44111 800.446.5539 / 216.671.3300 www.hinkleylighting.com
assembly instructions
Family: Plantation Item No. 4103 PL/PZ /BB
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
1. To assemble fixture, holding wire tight, slip loop (1) along wire and thread onto top
(A) of fixture.
2. Thread bottom finial (2) onto bottom of main fixture body (B).
3. Slip candle sleeve (3) over socket (C).
4. Please refer to the hanging instruction sheet (I.S. 19) provided to hang fixture. Then
fixture can be lamped accordingly.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, making all necessary electrical connections, and then
hanging the fixture from the ceiling.
start here
4103
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Note: Maximum wattage for 4103 fixture is 60 watts per bulb.
Drawing 1 - Fixture Assembly
A
B
1
2
3
C
2.7.08