Use and Care Manual

1/2
HINKLEY FANS LIMITED WARRANTY
HINKLEY products have been manufactured under the highest standards of quality and workmanship. All
HINKLEY products are warranted against defects in materials and workmanship, subject to certain conditions
and exclusions, for a period of two (2) years from the date the product was shipped to the original end use
purchaser and unless otherwise noted below.
FANS RESIDENTIAL
USE
COMMERCIAL/HOSPITALITY
USE
Motor Lifetime Lifetime
Integrated LED Components 5 years 3 years
LED Lamps 3 years 1 year
Blades, Controls, Switches,
Capacitors, Hardware
1 year 1 year
What HINKLEY will do: HINKLEY will, at its election, repair, replace or make appropriate adjustment where
HINKLEY inspection discloses any such defects occurring in normal usage within the applicable time period
above, subject to the following conditions and exclusions.
What is not covered: The following costs, expenses and damages are not covered by the provisions of this
limited lifetime warranty: (i) labor costs including, but not limited to, such costs as the removal and reinstallation
of Product; (ii) shipping and freight expenses required to return Product to HINKLEY
Original User: All warranties only apply to the original end use purchaser and original installation of Products
purchased from an authorized HINKLEY distributor. This warranty is not transferable.
The provisions of this warranty do not apply to Products: (i) used for purposes for which they are not
designed or intended; (ii) which have been subjected to alteration, abuse, misuse, negligence or accident; (iii)
which have been improperly stored, installed, maintained or operated; (iv) which have been used in violation of
written instructions provided by HINKLEY; (v) which have been subjected to improper temperature, humidity or
other environmental conditions; or (vi) which, based on HINKLEY's examination, do not disclose to HINKLEY's
satisfaction non-conformance to the warranty. Additionally, this warranty DOES NOT COVER scratches,
abrasions, or deterioration due to the use of paints, solvents, chemicals or abrasive cleaning techniques.

Summary of content (2 pages)