HS-10DTB1-4GB User Manual 1
. March 2012 Please read this user’s manual carefully before use. CONGRATULATIONS! Thank you for your purchase of this Hip Street product and we hope you enjoy using it. Please visit our website at www.hipstreet.com. Please ensure that you fully read and understand the information within this user manual prior to using your product. It is advised that you keep this user manual in a safe place for future reference.
Never apply heavy impact on the unit like dropping it or placing it on a magnet. Clean only with a dry cloth. Make sure the unit is turned off before cleaning. Do not use liquid cleanser. FCC WARNING: This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and the Canadian ICES-003.
(11) 5VDC Input Jack (14) HDMI Port (12) USB1 HOST Port (15) Micro-SD Card Slot (13) USB2 OTG Port 2.1 Battery charging The tablet is equipped with a built-in battery. Notifications will appear when the battery is low for when to charge it.
Connect one end of the power adapter to an outlet and the other end to the Charging Port of the tablet. Charging Methods 1. Once the power adapter is connected, the charging indicator of the battery will turn red to show that charging is in process. When the battery is full, the charging indicator will go out. 2. During the charging process, the tablet may be used normally. 2.
damaged. 2. Please do not pull out the memory card before being prompted to do so. 2.3 Hot swapping between memory card and external USB flash disk Please do not hot swap when using or browsing files in the memory card and/or external USB flash disk. Do not pull out the memory card or external USB flash disk when browsing or using their files through any applications. This may damage the card and USB flash disk and might automatically exit processes for selfprotection. Please refer to 2.
lock screen will be entered after start up. Slide unlock icon upward to enter the main interface; (slide it downward to turn off sound and slide it downward again to turn on sound) 2. Shutdown: Press and hold the power button for 4 seconds and the system will popup a shutdown confirmation window. Touch power off to shut the unit down. 3. Hibernation: Press and release the power button and the system will enter a hibernation state. The screen will turn off while in hibernation.
2.8 Network Connection Wireless network: 1. Select the Settings icon under the shortcut bar of the desktop 2. Select Wireless & Networks in the Settings menu 3. Check off the WI-FI box to turn on WI-FI 4. Select WI-FI Settings to set up the WI-FI network 5. All connections the device finds will be listed. Touch the connection to connect to it. 6. If the connection was successfully connected previously, the information will be stored.
status bar at the top of the desktop, indicating the strength of the connection. 3. Input Operations 3.1 Keyboard When using procedures or files that need a user input, the keyboard will automatically appear on the screen. Note: The tablet supports external USB keyboards, but when using an external USB keyboard, some keys may not function. 3.
4. Desktop 4.1 Status bar The status bar is on the top of the screen. It has 1 software button on the left and 5 on the right. They are: Home, Screenshot, Volume Down, Volume Up, Menu, and Back. The status bar also shows signal strength of WI-FI, the battery status, current time and other system information. 4.2 Main interface The tablets’ main interface page includes two modes: desktop screen and application screen. The two modes can be switched by the central shortcut button.
Touch the button to return to the home screen. 4.3 Shortcut In the desktop home screen, press the Menu button or click on the status bar. A menu will pop up on the bottom of the screen. Menu items includes: Add, wallpaper, search, notifications, settings, and Animation Mode. 5. Web surfing Users can access the Internet by clicking on the browser icon to open web browser. 6. Typical applications 6.
Click the email icon to enter Email. The following operation can be carried out: 1. Setup email account 2. Set up new email 3. Receive and send emails 4. Download or open attachments 6.2 File browsing Click My Pad icon to enter file browsing interface. Click to enter browsing interface to carry out: copy, cut, paste, new, rename, delete and other operations on LOCAL, SD1 and USB flash disk.
with extension name .apk. The installation prompts will popup. Select install to install the software to the device. 6.3 Music Click the icon to enter music mode. Click on a song to play it. 1. Click the icon to enter shuffle mode. 2. Click the icon to switch between all repeat mode and single play mode 6.
Click the icon to enter the video interface. Click on a video to play it. The interface is showed as following: 2. Click the icon to change view modes.
6.5 Calendar Click the calendar icon to check date and time, add memorandum etc. The calendar can be used only after being set. The specific operation is as following: 1. Firstly, connect the device to the wireless network, then open the calendar. A dialog box will come up asking to Add an Exchange account. Input the email address and password, and then click Next. 2. This screen will automatically exit and return to the main screen after setup. Now you may set the date, add memorandums, etc.
3. Click the menu button to show the following shortcut menu: 1 day, 7 weeks, 31 month, Agenda, Today, and more. The interface is shown as following: 6.6 Calculator Click the icon to carry out calculations.
6.7 Recorder Click the icon to enter audio interface: 1. Click the icon button to start recording. 2. Click the icon button to stop recording. A prompt will ask if you would like to keep or discard the recording. 3. Click the icon to listen to the recording.
6.8 Clock Click the icon to enter the desktop clock interface, which has an alarm clock, slideshow mode, music mode, and other functions. It appears as the following figure: 7. Camera Click the icon to enter the camera mode. Its operation is described as follows: 1. Click the icon on the bottom right corner to take photos.
DCIM/CAMERA under the root directory of memory card. 2. Move the slider on the right upward to switch to video mode. 3. Click the icon on the top right corner to view the last photo taken. By pressing the menu button you can use the functions: Slideshow, Details, Delete, Share, Rotate, and setting photo as wallpaper or contact icon can be done also. Click the back button to return to camera. 7.1 APK manager Pre-installed software in the APK manager cannot be display.
8. Tips and skills To return to the home screen – click To adjust the volume – click / 8.1 Convenient settings 8.1.1 Wireless Internet connection: Click the wireless Internet connection icon to enter the wireless internet connection interface.
to the wireless network 8.2 Use battery prompts The wide screen of the device will use a lot of power. If you want to extend the battery time, you can reduce the use of the following functions: 1. Watching movies, listening to music or taking photos 2. Display brightness: To reduce, press menu button - settings - display - brightness (turn down brightness) 3. Network search: Pres the menu button – settings – wireless & network - WIFI settings – uncheck network notification 9.
Set the Ringtone and Notifications. Silent mode To set all sounds to mute except the media and alarm clock, press the menu button settings – sound – check silent mode. Volume To set volume of media, alarm, and notifications: press the menu button - settings sound - volume.
Screen lock sounds To make sounds when screen is locked/unlocked, press the menu button - settings sound – Check Screen lock sounds 9.3 Display Brightness Press the menu button – settings - display (display settings) – brightness Automatic screen rotation Press the menu button – settings - display (display settings) – check auto-screen rotation to automatically change display orientation. If the check box is checked, the interface of the device will automatically follow the users orientation of the device.
Passwords To show passwords as you type, press the menu button - settings - location & security - check visible passwords 9.5. Applications Unknown source Allow the installation of applications from non-electronic markets. Manage applications To manage and remove installed applications, press the menu button - settings applications - manage applications. Running services To view and control the services currently running, press the menu button - settings - applications – running services.
Storage use To view storage used by applications, press the menu button - settings applications – Storage use. Battery use To view what has been using the battery, press the menu button - settings applications – Battery use. Development To set the development options of applications, press the menu button – settings applications - development. 9.6 Accounts & sync settings Background data Applications can sync, send, and receive data at anytime 9.
To check and operate the storage devices, enter menu - settings – external sdcard and internal device storage. Select the corresponding storage device under the storage device directory. The total space and available space can be checked after entering the storage device interface. The unmount operation also can be carried out. The interface showed as the following figure: Privacy To check device storage, please enter menu - settings - Privacy. It can be checked under device storage directory.
Set language (language and area), text input and automatic correction options. Select language To select language and area, press menu - settings - language & keyboard – select language Android keyboard To carry out Android keyboard settings, press menu - settings - language & keyboard - Android keyboard User dictionary To add words to the user dictionary and delete words from the user dictionary, press menu - settings - language & keyboard – user dictionary. 9.
9.11 About device Contains: Legal information, battery usage, model number, Android version, device status and software version.
10. The use of HDMI Videos on the tablet can also be viewed on equipment through HDMI (such TV sets with HDMI port). The maximum output resolution from the tablet is 720p. This method is explained: 1. Turn on the tablet 2. Connect an HDMI cable with an HDMI display device. Turn on the display device and a message will pop up on status bar. Note: Both the tablet and the HDMI display device will remain on except during video playback. 3.
Press the power key to turn the screen on, then you will see the lock screen. Slide unlock icon upward to unlock and enter the interface. 12. Troubleshooting 12.1 Close application All applications running will occupy memory on the device. Too many applications having been opened will influence the running speed of the device. Therefore, unused applications should be closed in time to reduce memory usage and keep the normal running speed of the device.
Click Stop to close the application. 12.2 Forced shutdown Press and hold the power key of the device until the screen shuts off. 12.3 Restore defaults To restore the device to original factory settings and clear all information, press the menu button - settings - privacy – factory data reset – reset device. Warning: After selecting to reset the device, all Google accounts, data, settings, application and downloaded applications will be deleted. Use this function with caution. 13.
Video MOV, MKV, AVI, RMVB, RM, M2TS, VOB, DAT, MPEG, Multimedia Features MP4, 3GP, WMV, ASF etc. Formats: MPEG4, Xvid, Divx, WMV Audio MP3, WMA, WAV, (APE, FLAC, AAC, OGG) Image JPG, TIF, BMP, GIF, PNG 14. Recycling This crossed bin symbol on the device indicates that the product, at the end of its life, must be disposed of separately from domestic waste, either by taking it to a separate waste disposal site for electronic devices or by returning it to your dealer when you buy another similar device.
15. Troubleshooting 15.1 I cannot connect to the Internet using Manual Setup. Answer: Ensure you have used Menu Save when exiting the advanced settings page. 15.2 I can see my access point name, but I cannot connect to the Internet. Answer: If your access point (AP) supports multiple access points at a time, you may have to connect the device using WPA encryption and not WEP. Please refer to your AP device manual for setup details. 15.
Answer: This may be caused by a failure in reading the Micro-SD card. Please turn off the device and power-on again. Also, please ensure that the card is fully inserted. Alternatively, please try to start the device with the Micro-SD card removed. 15.6 Can I manually change the screen orientation? Answer: Yes. Please check in “Display” in “Settings”, Touch “Auto-rotate screen” to toggle. 15.7 The device showed an error message and the application closed: “android.process.acore” fault.
Please insert the Micro-SD card to the first slot when using the voice recording, and applications such as SlideMe. 15.11 The touch-screen is not very responsive Answer: As the touch-screen is capacitive, please use your finger-tips for best results. Do not use any objects and remove any gloves before use. Contact Us Need assistance? Please call us! If you encounter any difficulties with this product, please visit our website at www.hipstreet.com and review our support section or call us.
by the individual or end user. For disposal and recycling, please contact your local waste management authorities. The recycling and processing of electronic waste will make a significant contribution towards helping protect the environment. The cell within this product uses Lithium Ion technology. The cell has a voltage rating of 3.7 V and a capacity of 6500mAh, with an energy rating of 24.
