User guide

Table 4–2 Sample Display Configurations

Sample Display

Configuration

DVI-I

Connector

mDP

Connector

mDP

Connector

HDMI

Connector

Total

Output

6×mDP - Native (×6) - - 6

DVI, 2×mDP, 2×mDP Native Native (×2) Native (×2) - 5

2×mDP, VGA, HDMI - Native (×2) mDP to VGA (A) Native 4

DVI, 2×mDP, HDMI - mDP to DVI (A) Native (×2) Native 4

DVI, HDMI, mDP,

HDMI

Native mDP to DVI (A) Native Native 4

DVI, mDP, mDP Native Native Native - 3

DVI, DVI, VGA Native mDP to DVI (A) mDP to VGA (A) - 3

For additional configuration information, visit http://www.amd.com/eyefinity.

Once displays are connected to the graphics card, you can change how your displays

are configured using the Control Center software application. For more information,

see Chapter 6 Using the Control Center Software (p. 19).

4.3 Using Adapters

The following procedure describes how to connect a display to your graphics card

using an adapter.

1. Turn off your computer and display.

2. Plug the adapter into the connection from your AMD Radeon graphics card and

tighten the thumbscrews (if there are any).

3. Connect your display's cable to the adapter and tighten the thumbscrews (if

there are any).

4. Turn on your display first, then your computer.

Use the Control Center software application to configure the new display.

4.4 Configuring the Display (Optional)

To change the display configuration or if you are experiencing an issue with the

display, do the following:

Note: If you are not experiencing any troubles with the display, no adjustments are

necessary.

1. Right-click on the desktop and, in the shortcut that appears, click Properties.

The Display Properties dialog appears.

2. Click the Settings tab and then select the screen resolution and color depth that

best suit your requirements and the display’s performance.

Display Configuration 13