Operating instructions

8
Disposal
Old appliances still have some residual value. An environmentally friendly
method of disposal will ensure that valuable raw materials can be
recovered and used again. The refrigerant used in your appliance and
insulation materials require special disposal procedures. Ensure that none
of the pipes on the back of the appliance are damaged prior to disposal.
Up to date information concerning options for disposing of your old
appliance and packaging from the new one can be obtained from your
Locks
entrapped keep the key out of reach and not in the vicinity of the
appliance.
as a safeguard.
THIS APPLIANCE MUST BE EARTHED.
and carefully disposed of. To avoid a possible shock hazard, do not insert the
discarded plug into a socket
.
Fitting a new plug
If for any reason you need to
a new plug, The
Mains Lead must be c onnected as shown here.
with the following code:
CONNECT GREEN
AND YELLOW TO
EARTH (E) (Note:
some appliances do
not have earth wires.)
CONNECT
BLUE TO
NEUTRAL (N)
MAKE SURE THE CABLE IS
HELD BY THE CLAMP
CONNECT
BROWN TO
LIVE (L)
ELECTRICAL CONNECTIONS
If the colours of the wires in the mains lead of this appliance do not
correspond with the coloured markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured Green and Yellow MUST be connected to the
terminal which is marked with the letter E (Earth) or symbol
coloured Green.
The wire which is coloured Blue MUST be connected to the terminal which is
marked with the letter N or coloured Black. The wire which is coloured Brown
MUST be connected to the terminal which is marked with the letter L or
coloured Red.