TABLE OF CONTENTS HITACHI Video Deck VHS VT-M294A Owner's Manual Your Complete Guide to Videocassette Viewing and Recording Using these quality features: n Automatic tape head cleaning n Up to 8 delayed recording programs n Auto Tracking for improved picture in playback n Frequency synthesizer quartz tuner n Illuminated remote control for use with your VCR and TV n On-screen programming guide n Auto clock set feature n VCR Plus+* for easy timed recording * VCR Plus+ and PlusCode are trademarks of Gemstar
TABLE OF CONTENTS TABLE OF CONTENTS TABLE OF CONTENTS ............................................................................................................................ 2 FOR YOUR SAFETY................................................................................................................................. 5 Read This First ............................................................................................................................................ 7 IMPORTANT SAFEGUARDS ..
TABLE OF CONTENTS To Find Specific Sections on a Tape............................................................................................... 36 Basic Operations (Recording) ................................................................................................................... 39 Recording a Program..................................................................................................................... 39 Before you Record .....................................................
TABLE OF CONTENTS HITACHI CANADA WARRANTY CARD (Back) ................................................................................
FOR YOUR SAFETY FOR YOUR SAFETY POWER SUPPLY: AC 120V, 60 Hz ONLY. The POWER switch turns the VCR on and off, leaving the clock/timer unaffected. If the unit is to be left unattended for a long period, it is recommended that the unit be completely switched off and unplugged. Illustrated below is the label on the back of your unit. This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock.
FOR YOUR SAFETY WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. Caution to user: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Read This First Read This First Thank you for buying a Hitachi product. You've chosen the best VCR for you, and we want to help you make the most of your purchase. Please take time to become familiar with this manual and how it is set up. Keep it handy for future reference, too. To guide you, we've concluded: "Must read" sections containing important cautions for your family's safety as well as the basic facts you need to use the VCR.
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too. This page lists important information that will help to assure your enjoyment and proper use of a Video Cassette Recorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy place for future reference.
IMPORTANT SAFEGUARDS power supply to your home, consult your video dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions. 6 Overloading -- Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords, damaged or cracked wire insulation and broken plugs.
IMPORTANT SAFEGUARDS This will help avoid any potential hazard from electric shock or fire. If in doubt, contact qualified service personnel. 10 Water and Moisture -- Do not use this video product near water -- for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 11 Accessories -- Do not place this video product on an unstable card, stand, tripod, bracket or table.
IMPORTANT SAFEGUARDS 4 Cleaning -- Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 15 Object and Liquid Entry -- Never push objects of any kind into this video product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product.
IMPORTANT SAFEGUARDS refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged b. If liquid has been spilled or objects have fallen into the video product. c. If the video product has been exposed to rain or water. d. If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions.
Getting Started Getting Started Relax. Using a VCR is very straightforward. This sections explains how to hookup the VCR, quick tour of the controls, set up for first-time operation using on-screen menus, and videocassette tapes. Enjoy getting to know all about your Hitachi VCR. Let's get started. Simple Hookups 1 Decide Where to Put Your VCR Be sure your chosen location allows for proper ventilation, stability, and protection from heat and moisture (see Important Safeguards).
Getting Started Operations) Any other devices you want to include in the system (stereo, second VCR, etc.) We will guide you through the process. But first, turn the TV and the VCR around so you are looking at their backs. Note the various input and output receptacles, their shapes, and how they are labeled. Then read through the rest of this hookup section before proceeding to an actual hookup. DO NOT TURN ON THE POWER YET. FOR YOUR SAFETY, LEAVE YOUR TV AND VCR UNPLUGGED WHILE HOOKING THEM UP.
Getting Started TV. If your TV has stereo AUDIO jacks, connect the AUDIO OUT jack on the VCR to the one labeled MONO on the TV. If one is not labeled MONO, you may need a Y-adapter to hear sound on both channels. This audio hookup will give you better sound than the RF signal hookup, because the electronic signal won't have to go through a conversion process. Capabilities: The audio and video signal connections are all you need to play back a prerecorded tape.
Getting Started (where you first disconnected the TV in step 1.) Capabilities: With this hookup, you should now be able to perform all the basic functions provided by this equipment. External or Internal 300 Ohm Antenna If you have either an external or internal (rabbit ears) antenna rather than cable, you may have 300 ohm connectors like these. In this case, you will need special adapters to make the 75 ohm round wire connection shown below. (You may already have one on your TV.) 1.
Getting Started Separate UHF and VHF antenna wires, both 300 ohm flat wire 300 ohm flat UHF and 75 ohm round VHF If you have "rabbit ears" (an antenna on top of your TV), you will need an additional adapter and 75 ohm extension to make your leads reach from the antenna to the VCR. This connection will work only if you have a strong, clear picture on the TV, indicating a strong signal. Connect the antenna to the adapter, and use the cable extension to go from the adapter to the VCR.
Getting Started Capabilities: With this hookup, you should now be able to perform all basic functions provided by this equipment. 5 Attach the TV and VCR to the Power Supply Plug in the TV and VCR power cords to the wall outlet or an appropriate extension cord or surge protector. See Important Safeguards for further precautions (page 6). 6 Install Batteries in the Remote Control The remote control requires two fresh "AA" batteries.
Getting Started Your basic hookup is now complete. When you're ready to try hooking up a second VCR or a video camera for a complete home entertainment system, see Advanced Operations. Now turn the TV and VCR back around facing you and begin your quick tour of the controls (page 15).
Getting Started (Controls) Getting Started (Controls) Quick Tour of the Controls Study these pictures carefully to learn about the buttons and controls that you'll need for everyday operation. Various controls are explained throughout this manual as they are needed, but now is a good time to get familiar with their locations. Most of the time, you'll be directing the VCR from the remote control, but there are some controls on the VCR that will come in handy too.
Getting Started (Controls) Try pressing the remote control's buttons one at a time. As you press, one of the three device buttons lights up--VCR, TV or CAM. This helps you keep track of which device you are controlling at the moment. See Remote Picture Remote Control Buttons POWER Turns the VCR on and off. GUIDE Brings up an on-screen setup and programming guide, the Easy Guide System. VCR/TV Switches between viewing through the VCR and not viewing through the VCR.
Getting Started (Controls) LIGHT Illuminates key function buttons for a few seconds. SHUTTLE Controls the videocassette's forward and reverse motion with one convenient dial. * Refer to the camcorder's instruction manual for its operation. When the Remote Doesn't Work Right Check out these possibilities: Low Battery If the remote is not working even at close range, try putting in two fresh AA batteries.
Getting Started (Controls) STOP/EJECT Cancels any videotape action, and when pressed a second time, ejects tape. PLAY/STILL Plays and pauses the loaded videotape. SHUTTLE Controls the videocassette's forward and reverse motion with one convenient dial. DISPLAY Shows time, channel, and status indicators. CHANNEL Up and down arrows for selecting channels. REC/IRT To begin recording. Display Indicators Watch for these signs and symbols that let you know that the VCR is responding to your instructions.
Getting Started (Controls) You may view all the on-screen instructions in English, French or Spanish. When you first set up your VCR, it will be set to English. Press number 8 or 9 for the other language options. Now, you will do most of your programming and setup by pressing numbers on the remote control which correspond to options presented in this and other on-screen menus. Instructions are easy to follow, and blinking spaces on the screen will show you where your input is needed.
Getting Started (Initial Setup) Getting Started (Initial Setup) Setup for First-Time Operation Before you use your VCR to watch or record from your TV, you need to "tell" the VCR whether your TV uses cable or antenna input and let it program itself to receive your TV's channels. It's also a good idea to set the clock so you can do timed recording later. With your TV and VCR hooked up, turn them both on and follow these steps using the remote control.
Getting Started (Initial Setup) 1 CHANNEL Press 1 to select the type of receiving setup you have: Internal or external antenna Ordinary cable Alternate cable (if CATV1 doesn't give you the channels you expect) 2 MOVIE Press 2 to select whether you want prerecorded movies (safety tab removed) to play automatically when loaded, and then rewind, eject and turn off the power when done. Options are and .
Getting Started (Initial Setup) by up to one minute. Setting the Clock with the Auto Clock Set Function When the VCR is hooked up via an antenna or cable (no cable box): 1. Press POWER to turn the VCR power off. When the VCR is turned off, press POWER to turn the power on, then press it again to turn the power off. The set time appears in the VCR display to show that the current time has been set. It may take about five minutes for auto clock setting.
Getting Started (Initial Setup) channel indication on the cable box changes automatically. 4. The screen shown in step 3 above changes to a TV picture and the time appears in the VCR's display. It may take about five minutes for auto clock setting. If the clock is not set after about five minutes have elapsed, press GUIDE then set the clock manually (See page 25). If the displayed time drifts from the current time by more than one hour, select your correct time zone and set the DST (See page 24).
Getting Started (Initial Setup) another option, then set the time again. To set the clock manually 1. Press GUIDE, then press 6 to bring up the CLOCK SET screen. Press 1 to switch "CLOCK SET: AUTO" of item 1 to "CLOCK SET: MANUAL". If "CLOCK SET: MANUAL" is specified in item 1, "SET TIME ZONE" of item 3 or "SET DST" of item 4 cannot be selected. 2. Press 2 to bring up the following screen.
Getting Started (Initial Setup) to enter the correct setup. The day of the week is set automatically. More About Channel Selections Your VCR is capable of receiving 68 broadcast TV channels (VHF 2-13, UHF 14-69) and 125 cable channels (CATV 1-125). When you press 8 on the Initial Setup screen, the tuner automatically cycles through all available channels in your area and places them in memory. This takes 2-3 minutes.
Getting Started (Videotapes) Getting Started (Videotapes) About Videocassette Tapes Types The best thing you can do for your VCR is use the best quality tapes available. This VCR uses VHS tapes only, which are the most common type. Look for the VHS mark on new or prerecorded tapes you buy. Tapes are marked either T-120 or T-160, which signifies how many minutes of programming they can hold at standard recording speed (SP). To get the best quality picture, record at standard speed.
Getting Started (Videotapes) Loading and Ejecting When you load a videocassette into the VCR, there is only one right way! Most tapes show you the way with a little arrow on the top side which should go in first. Push the videocassette gently into the slot on the front of the VCR. You will feel the VCR take it in. When the cassette is all the way in, the VCR powers up automatically and a TAPE-IN indicator shows on the display. It may also start playing immediately if the safety tab has been removed.
Basic Operations Basic Operations Practice starting and stopping a video you've rented--play it through, see how it automatically rewinds. Get a blank tape and try recording a TV show. Then you'll know how to use the VCR when you need to--or where in the manual to find the instructions you forgot. Let's go! Viewing a Videocassette To play Back a Recorded Tape 1. Insert the cassette, arrow-side forward, into the slot at the front of the VCR.
Basic Operations up. After operating the Tracking manually, eject the tape and reinsert it to reactivate auto Tracking. If you press the DISPLAY button when viewing a videocassette, the display, as shown, appears for several seconds so you can see the functions of the number buttons on the remote control. 1: TRACKING + 3: SLOW + 4: TRACKING 6: SLOW 9: FRAME ADVANCE The above functions always work when you are viewing a videocassette even if the display, as shown, is not displayed.
Basic Operations Special Playback Effects Still Playback (Pause) Press PAUSE to still the tape during play. The picture will "freeze". You may see some minor noise or interference on the screen. This is normal. After 5 minutes in PAUSE mode, the VCR automatically switches to STOP mode to protect the tape. If noise bars appear on the TV screen during PAUSE mode, first set the VCR to SLOW mode and then press the 1 or 4 button on the remote control to minimize the noise bars.
Basic Operations If noise bars appear on the TV screen during SLOW/STILL mode, first set the VCR to SLOW mode and then press the 1 or 4 button on the remote control to minimize the noise bars. The noise bars are then eliminated automatically in the STILL mode. If you turn the dial in the STOP mode, you can fast forward or rewind the tape. The tape continues to be wound even after you release the dial.
Basic Operations At the point that you want to go back to, press CLEAR. This resets the counter to 0:00:00. Press STOP when you are done recording or playing back the tape. Press DISPLAY again and an "M" will display below the counter on the TV screen: This indicates that the counter's memory function is engaged. Now when you rewind the tape, it will automatically stop at the spot where you cleared the counter. (Notice it moves just past the marker and then back to it.
Basic Operations new system may not recognize index marks on tapes recorded on older VCRs. If the VCR is in PLAY mode, press STOP. Press DISPLAY. This brings up the Set Go-To Time/Index Screen. Press 7 for rewind or 9 for forward to begin the index search. The tape rewinds or fast-forwards until an index mark is detected. During this search, the words SCAN AND PLAY display on the bottom of your screen. When the VCR finds an index mark, it plays 15 seconds of the program that begins at that spot.
Basic Operations (Recording) Basic Operations (Recording) Recording a Program Before you Record The VCR must be hooked up properly for recording. See the Simple Hookups at the beginning of this manual. Copyright Infringement Warning Most television programs and films are copyrighted. This means that someone has legal rights governing the reproduction and distribution of this material. In certain circumstances, copyright law may apply to private in-home taping of copyrighted materials.
Basic Operations (Recording) To Watch the Same Program While Recording To view what you are recording, press VCR/TV so that the VCR is selected--the VCR indicator will light up on the VCR's display. You'll want to do this the first few times anyway to be sure you're recording what you think you are. To Watch One Program While Recording Another Once you have set the VCR for recording, press VCR/TV. Now, you will be viewing through your TV only.
Basic Operations (Recording) simplified timer recording without having to use the programming timer. In order to set the IRT properly the clock must be set before starting. Follow the steps 1 through 5 on "Basic Recording Steps" on page 36. After the recording has started, press the REC/IRT button again to indicate the recording time on the display. You can set the recording time length, which increases by intervals of 30 minutes, one hour, one and half hours, two hours, three hours, and four hours, (i.e.
Basic Operations (Recording) Be sure that the clock is set to the correct time. Date and day of the program Starting time Ending time Channel to be recorded Blank or erasable videocassette (safety tab intact) Delayed Recording Steps You set up the delayed recording using the on-screen Easy Guide System. Press GUIDE, then press 2 for DELAYED RECORDING. Press number buttons 1.2 or 3 for ONE TIME, DAILY, or WEEKLY RECORDING. Follow the flashing instructions on screen to complete the programming.
Basic Operations (Recording) Now fill in the blanks: Select channel 8 by pressing 0 and 8 on the remote control. Enter the start time by pressing 0,6,0, and 0 for 6 o'clock. Then press 2 for PM Enter the end time, half past six, as 06:30. The VCR automatically selects PM for you. The screen shows today's date, so no changes are needed on that line. Press 5 to switch to SP because you want the best quality picture for this recording. Everything is as you want it, so press GUIDE to set the program in memory.
Basic Operations (Recording) were programmed. If the shows are all scheduled to start at 7 AM, the VCR starts with the first program at 7 AM, and switches to what remains of the second program when the first program is done recording, and so on. Shows with Different Starting Times If the programs start at different times, the VCR records the show scheduled to start earliest, records the entire show, then moves on to the show with the next earliest starting time.
Basic Operations (VCR Plus + Recording) Basic Operations (VCR Plus + Recording) Easy Delayed Recording with VCR Plus + About VCR Plus+ This handy feature makes timed recordings a snap. You don't need to enter the specific channel, date, time, or duration of a program. All you enter is its PlusCode--a number of up to eight digits. This special code is easy to find in your favorite TV program guide or a daily newspaper. Here's a sample page from TV Guide showing PlusCodes next to each program.
Basic Operations (VCR Plus + Recording) 3. If you don't get cable TV, make a list of all the broadcast channel numbers you receive on your TV--for example, channel 4 WTTV (Ind.), channel 20 WFYI (PBS). 4. If you subscribe to cable TV, have your cable company's channel directory handy. This should list all the channels as you receive them in your home, for example: Channel 34 Arts and Entertainment Network Channel 35 Turner Network Television Channel 36 ESPN 5.
Basic Operations (VCR Plus + Recording) Home Antenna If your VCR is connected directly to your home antenna, chances are you don't have to do any special channel setup. To find out, compare the VCR Plus+ channels in your TV program guide to your list of channels that you receive at home. If any channel numbers don't match, follow the steps (page 46) to assign your local channel numbers to VCR Plus+ numbers.
Basic Operations (VCR Plus + Recording) In the example below broadcast channel #38 is assigned to VCR Plus+ channel #42. 4. Repeat step 3 for all channels that need to be assigned. 5. Press GUIDE to end the setup procedure. You are ready to begin delayed recording with VCR Plus+. Cable with a Cable Box or Cable with a Cable Box and Splitter Setup Use this setup procedure if you receive all channels through a cable box. CABLE BOX SET tells the VCR how to record or to view programs from the cable box.
Basic Operations (VCR Plus + Recording) 7. Press GUIDE to enter the output channel of your cable box. You will then see this screen. 8. Press GUIDE to display the CABLE BOX TYPE message on the TV screen. 9. Enter your cable box type from the chart below by pressing two numbers. 10. Press GUIDE to enter your cable box type. The VCR will change the cable box from channel 02 to channel 09 when you enter the correct code for your cable box. 11. Cable box tuned to channel 9: Press number 2 on the remote.
Basic Operations (VCR Plus + Recording) entries. If none of the codes work, press GUIDE several times to quit. The VCR will not control your cable box. However, the output channel of the cable box has been set. Turn on the cable box and leave it tuned to the channel you want to record some time before the recording is to begin. Using VCR Plus+ to Record a Program Now that your channels are set up, you can take advantage of this quick and easy method of delayed recording.
Basic Operations (VCR Plus + Recording) 4. If you have entered the correct PlusCode, press GUIDE to store the PlusCode in the VCR's memory. This brings up another screen: Press number buttons 1, 2, or 3 to select ONE TIME, DAILY, or WEEKLY RECORDING. Important: Programming does not take effect unless you select one of these options. 6. When the next screen comes up, choose between standard or extended tape speed by pressing the 5 button.
Basic Operations (VCR Plus + Recording) VCR. Caution on the VCR Plus+ recording After entering a VCR Plus + number, check the information displayed with the "PROGRAM REVIEW", if there is (are) any unnecessary program(s), please cancel or correct it (them).
Advanced Operations Advanced Operations This section explains how to use the VCR's remote control to operate your TV. It also shows you how to hook up a cable box and how to connect a stereo or a second VCR for a complete home entertainment system. Controlling Your TV with the VCR's Remote Compatibility The remote control is designed to be compatible with many televisions and cable converters, but will not work with every one made.
Advanced Operations If that button combination does not change the TV channel, go through the whole list of button combinations one by one until you find one that does change your TV channel. Also, if your brand of TV is not listed in the chart, try all the number buttons. One of them may work for you. If the TV channel still doesn't change after going through all the button combinations listed, it is likely that you will not be able to program this remote control for your TV.
Advanced Operations (Cable Box Hookups) Advanced Operations (Cable Box Hookups) Hooking Up to a Cable Box The cable box brings all the advantages of pay cable, but finding a satisfactory hookup can be challenging. To sort out what to do, we suggest a step-by-step approach to installation. Before you begin, take a close look at the back of your TV to see where cables are currently connected. You may need to reconnect them that way later.
Advanced Operations (Cable Box Hookups) Check all the TV VCR functions. B. Advanced Hookup (Cable box to unscramble all channels) Use this hookup for slightly improved picture quality and more convenient operation use of VCR/TV button not required. 1. Connect as shown. This connection requires additional accessories not provided. 2. Plug in power cords of VCR, TV, and cable box. You will tune the TV to its video input to watch the VCR.
Advanced Operations (Second VCR) Advanced Operations (Second VCR) Integrating a Second VCR With another VCR hooked up, you can copy videotapes as needed, and you can get fancy with multimedia programming. For this discussion, we refer to the model VTM294A Hitachi as VCR2 and the other unit as VCR1.
Advanced Operations (Second VCR) The other VCR must be a Hitachi and must have a jack labeled EDIT. This is the recording VCR. You will need to purchase a synchro edit cable. Ask for part number VTCH40S. Use the buttons on the VCR for operation. Do not operate the remote control. Hookup Hook up the two VCRs and the TV as shown on page 56. Connect the synchro edit cable from EDIT on RECORDING VCR to EDIT on PLAYBACK VCR.
Advanced Operations (Second VCR) Press the AVX button on the VCRs remote control so that the L2 (Line) indicator appears in the VCR display. Press REC/IRT on the VCR to start recording. Press PLAY on your camcorder to start copying your tape.
VCR Care and Servicing VCR Care and Servicing The VCR is fairly self-servicing, but you'll want to keep an eye on a few things as you go. In addition, you may sometimes have troubles with your VCR. We offer some suggestions for care to prevent problems, ways to troubleshoot, and places to contact when you cannot solve the problems yourself. Routine Cleaning Head Cleaning The heads are tiny mechanisms in the VCR that pick up the video signal as a videotape passes over them.
VCR Care and Servicing Many operational problems are easily remedied by reviewing the instructions in this manual and trying out some different controls and settings. The chart on page 63 covers the more common problems that new VCR owners encounter. Don't Attempt Repairs Yourself Do not remove the cover or the back of the VCR--this will void the warranty and endanger your safety. The exposed uninsulated voltage in this unit may be high enough to cause electrical shock.
Care and Servicing (Problems) Care and Servicing (Problems) Often Encountered Problems PROBLEM THINGS TO CHECK NO POWER POWER CORD PLUGGED IN? CONNECT THE POWER CORD TO AC OUTLET DELAYED RECORDING PROGRAM SET TO THE CORRECT CHANNEL? RESET THE DELAYED RECORDING. IF USING VCR PLUS+, CHECK DOES NOT WORK THE CHANNEL SETUP.
Care and Servicing (Problems) PLAYBACk? VIEWING CHANNEL? OR 4. TV CANNOT BE OPERATED BY THE VCR’S REMOTE CONTROL. IS VCR REMOTE CONTROL PROGRAMMED FOR YOUR TV? FOLLOW INSTRUCTIONS IN ADVANCED OPERATIONS TO PROGRAM THE REMOTE TO SIGNALS THAT YOUR TV CAN RECOGNIZE. IS REMOTE CONTROL SET TO CONTROL THE TV. PRESS THE TV DEVICE BUTTON, THEN PRESS THE BUTTON CORRESPONDING TO THE TV FUNCTION YOU WANT. HAS A LOADED CASSETTE BEEN STOPPED MORE THAN 5 MINUTES? NOTHING IS WRONG.
Hitachi Service Hotline Authorized Hitachi service facilities are available throughout the US and Canada. For the location nearest you, call the Hitachi Service Hotline at one of these numbers: In the continental U.S.A. DIAL TOLL FREE 7 days a week, 24 hours a day 1-800-HITACHI (1-800-448-2244) You must state your zip code when calling In Canada QUEBEC MONTREAL TORONTO VANCOUVER 418-681-7719 514-679-9150 416-821-4545 604-526-7881 LIMITED WARRANTY Hitachi Home Electronics (America), Inc.
period. For 90 days from the date of original purchase, Hitachi will provide labor for the repair or replacement of defective parts without charge, subject to the following conditions: 1. Owner must provide verification of the date of purchase when requesting Limited Warranty Service. (Dated Sales Receipt Required) 2. All repairs must be performed by a Hitachi Authorized Service Facility.
HITACHI WARRANTY CARD (USA Back) HITACHI WARRANTY CARD (USA Back) Warranty Limitations The Limited Warranty provided by Hitachi does not cover: A. Cabinet (exterior finish items), Battery Packs, Accessories, Head Cleanings, Video Tape Damage, or TV Set Modifications. B. Any defect, malfunction, or failure caused by or resulting from improper service, maintenance, repair, use of Video Cleaning Cassettes, or from abuse, neglect, accident, or any other cause beyond the control of Hitachi. C.
HITACHI WARRANTY CARD (USA Back) EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. Important Notice: Retain your sales receipt for warranty purposes. Please complete the section below for your records as it may be needed in the event of loss. Attach sales receipt to this card. VIDEO PRODUCTS LIMITED WARRANTY REGISTRATION (for your record) Model No.
HITACHI WARRANTY CARD (Front) CANADA ONLY HITACHI WARRANTY CARD (Front) CANADA ONLY NOT VALID IN U. S. A. HITACHI VIDEO PRODUCTS GOLD CARD WARRANTY * See inside for the GOLD CARD advantages and how to get it. HITACHI EXCEPTIONAL PERFORMANCE HITACHI (HSC) CANADA INC. 3300 Trans Canada Highway, Pointe Claire, Quebec H9R 1B1 IMPORTANT NOTICE: This warranty will not apply to products purchased outside of Canada OR sold by any organization other than HITACHI (HSC) CANADA INC.
HITACHI WARRANTY CARD (Front) CANADA ONLY Only after the expiration of the normal warranty, the owner can have the product repaired, without charge at any authorized Hitachi Service Center upon presentation of the Protection Plan Card. D - This Protection Plan is applicable to the product mentioned excluding the accessories such as cables, batteries, etc.
HITACHI WARRANTY CARD (Front) CANADA ONLY Hitachi Service Center. The Plan Owner should never directly pay the authorized Service center unless given special authorization from Hitachi. No repair costs will be reimbursed directly to the Plan Owner. G - The Plan Owner will receive a PLATINUM CARD which is the only valid document to be presented at the time of repair to an authorized Hitachi Service Center. THIS PROTECTION PLAN IS NOT TRANSFERABLE NOR REFUNDABLE.
HITACHI CANADA WARRANTY CARD (Back) HITACHI CANADA WARRANTY CARD (Back) Hitachi VIDEO PRODUCTS are guaranteed to be free from defects in workmanship and material. If any failure resulting from either workmanship or material defect should occur under normal and proper usage within the period stated hereunder from the original provable date of purchase, such failure should be repaired at no cost to the buyer, provided the defective product is brought to a HITACHI AUTHORIZED SERVICE CENTER in Canada.
HITACHI CANADA WARRANTY CARD (Back) 2. Damages caused by incorrect use, carelessness, unauthorized alterations, improper storage or unauthorized service or repairs. 3. Damage caused by fire, flood, lightning, acts of God, or other events beyond the control of Hitachi. 4. Batteries, tape cassettes, earphones, antennas, accessories and external parts such as cabinet and knobs. 5. PRODUCTS PURCHASED OUTSIDE CANADA. 6. Products used outside Canada. 7.
HITACHI CANADA WARRANTY CARD (Back) Model No. Serial No.