User manual

EN-Quick Guide
If smoke, odor or noise rise from the device, turn off the power
at once and unplug the power cable, and then contact the
service center.
If the product does NOT work properly, contact your dealer or
the nearest service center. Never attempt to disassemble the
camera yourself. (We shall NOT assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cautions
Make sure the power supply voltage is correct before using the
camera.
Do NOT drop the camera or subject it to physical shock.
Do NOT touch senor modules with fingers. If cleaning is
necessary, use clean cloth with a bit of ethanol and wipe it
gently. If the camera will NOT be used for an extended period,
replace the lens cap to protect the sensor from dirt.
Do NOT aim the camera at the sun or extra bright places.
Blooming or smearing may occur otherwise (which is NOT a
malfunction), and affect the endurance of sensor at the same
time.
The sensor may be burned out by a laser beam, so when any
laser equipment is in using, make sure that the surface of
sensor will NOT be exposed to the laser beam.
Do NOT place the camera in extremely hot, cold (the operating
temperature shall be-30° C to +60° C), dusty or damp locations,
and do NOT expose it to high electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for
operating environment.
Keep the camera away from liquid while in use.
While in delivery, the camera shall be packed in its original
packing, or packing of the same texture.
Improper use or replacement of the battery may result in
hazard of explosion. Replace with the same or equivalent type
only. Dispose of used batteries according to the instructions
provided by the battery manufacturer.
PRODUCED BY:
Hangzhou Hikvision Digital Technology Co. Ltd.
Qianmo Road 555, Binjiang District, Hangzhou
310052, China
Made in China
CONTACT INFORMATION:
Hangzhou Hikvision Digital Technology Co. Ltd.
Qianmo Road 555, Binjiang District, Hangzhou
310052, China
Tel: +86-571-8807-5998
Fax: +86-571-8993-5635