User manual

EN-Quick Guide
This document introduces the procedure of using analog
camera/analog speed dome.
Step 1. Check the installation environment including cables, tools,
and the original packaging.
Step 2. Install the analog camera/analog speed dome to the
proper place.
Step 3. Connect Cables.
1) Connect power cable to the power adapter.
2) Connect video cable to the VIDEO IN interface in the
DVR.
3) Connect RS-485 to the DVR (only available for analog
speed dome).
4) Connect alarm in/out to the alarm device (only available
for analog speed dome).
Step 4. Set DIP switch for analog speed dome.
Note:
Step 4 is only available for analog speed dome.
Step 5. Power on the analog camera/analog speed dome, DVR and
monitor, then you can view the image on the monitor.
SYV
RS-485
Cable
DVR
Analog Speed
Dome
Monitor
Analog Camera
SYV
TECHNICAL SUPPORT
In case of any problem, please immediately contact the local
after-sales service authorized by HiWatch.