User Manual HKC 32C9A
Index Introduction Time settings............................................... 17 Installation ................................................3 Safety......................................................... 3 Lock settings ............................................... 18 Warning/Caution .......................................... 4 Set-up ........................................................... 19 Main unit descrription.................................. 7 Screen settings (PC-modus) ...........
Introduction Thank you very much for purchasing your LED TV. It serves as a normal colour TV and a PC monitor. To enjoy your set fully from the very beginning, read this manual carefully and keep it handy for future reference. INSTALLATION 1. Locate the TV in the room where direct light does not strike the screen. Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. 2.
Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to avoid the risk of electric shock, do not disassemble this equipment by anyone except a qualified service personnel.
Caution - - Caution High voltages are used in the operation of this product. Do not open the product’s casing. Refer servicing to qualified service personnel. - Caution To prevent fire or electrical shock hazard, do not expose the main unit to moisture. Do not place objects filled with liquids, such as vases, on the TV. Caution Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.
Caution Caution Never stand on, lean on or suddenly push the product or its stand. You should pay special attention to children. Caution Do not place the main unit on an unstable cart stand, shelf or table. Serious injury to an individual, and damage to the television, may result if it should fall. Caution When the product is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet.
Main unit tekst description Control Panel Button Function VOL+ : VOL- : CH+: CH- : MENU : SOURCE : POWER : Volume up. Volume down TV channel up. TV channel down. Press to select the main menu. Select the input signal. Switch on when in standby mode or to enter the standby mode. TV Connections 12 1 1. 2. 3. 4. 5. 2 VGA PC audio Scart DVB-S2 RF antenne 3 4 5 6. 7. 8. 9. 10. 6 7 8 HDMI-1 HDMI-2 HDMI-3 Coaxial Mini AV & AUDIO 9 10 11 11. 12. 13. 14.
Remote tekst Control 1 Indicator light. The red indicator light flashes red to show that the remote is working and sending a signal. ASPECT 2 Switch the TV between on and standby mode. 1 2 3 4 5 6 7 8 9 LIST 0 REPEAT S CH VOL AUDIO MENU INPUT OK DVD SETUP BACK EXIT INDEX HOLD REVEAL SIZE FAV TV.RD MIX S.PAGE TEXT CANCEL GUIDE 3 Watch the screen in various formats: Auto/4:3/16:9/Zoom/ Subtitels/Smart-zoom. 4 Mute and restore your TV sound. 5 0-9 numbers.
Remote tekst Control 19 • Exit the OSD menu. • Display and exit the DVD setup menu (DVD mode). ASPECT 1 2 3 4 5 6 7 8 LIST 0 9 REPEAT S CH VOL AUDIO MENU INPUT OK DVD SETUP BACK EXIT INDEX HOLD REVEAL SIZE FAV TV.RD MIX S.PAGE TEXT CANCEL GUIDE 20 • Access the Teletext items (ATV/DTV mode). • Access menu options. PROG (RED) • Display th channel menu (ATV/DTV mode). • Access menu options. • Programme the DVD (DVD mode).
OSD basic tekst adjustment Installation Guide If this is the first time you are turning on the TV and there are no programs in the TV memory, the installation Guide menu will appear on the screen. 1. Press the / buttons to select the language. 2. Press the / buttons to select the local country 3. Press the / buttons to select energy mode. Note: Searching for platform will take a long time, please be patient and don’t turn off the TV.
OSD basic tekst adjustment OK Channels EXIT Press MENU to display the main menu. Press to select ‘CHANNEL’ in the main menu. Auto Tuning Press and select ‘Auto Scan’. Press to select the country and press to select ‘Tune Type’ and ‘Digital Type’. MENUOK MENU EXIT EXIT OK or EXIT to stop scanning. Press MENU to skip scanning. Press OK to start Turn on “Sorting by LCN” to put the channels in logical order.
OSD basic adjustment Note: Searching for platform will take a long time, please be patient and don’t turn off the TV. OK Analog Manual Tuning Press to select ‘Manual scan’ and press to ‘ATV Manual Tuning’. EXIT Press MENU to return to the previous MENU the menu. EXIT to exit OK menu.
OSD basic adjustment OK DTV Manual Tuning (digital) Press to select ‘Digital Manual scan’ and press to start. EXIT Press MENU to return to the previous MENU the menu. EXIT to exit OK menu. Press Channel Edit Press to select ‘Programme MENU EXIT Edit’ and press OK to select. Delete channels Press to select the channel and press the red button to delete the channel. Skip channels Press to select the channel and press the blue button to skip the channel.
OSD basic adjustment Schedule List Press to select ‘Schedule List’ and press Signal information (only use in DTV) OK CI card Information Press to select ‘CI info’. Press OK OK MENU submenu. EXIT to enter the Press to select ‘Signal information’. Press MENU to return to the previous MENU the menu. EXIT to exit OK menu. Press EXIT MENUcard information.
Picture OK You can select the type of image that best suits your personal preference. EXIT Press MENU to enter the OSD menu. Than press to select the ‘PICTURE’ MENU EXIT menu. Press to select ‘Picture Mode’. Press OK to select. You can change various image options here.
Sound OK You can select the type of sound that best suits your personal preference. EXIT Press MENU to enter the OSD menu. Than press to select the ‘SOUND’ menu. MENU EXIT Press OK to select. You can change various sound options here. Item Adjustable Standard Description Sound settings • • • • • Default Set the various default sound settings Sound Mode Treble Bass Coaxial Mode AD switch You select the item you want to change with the buttons.
Time OK You can select different time settings that best suits your personal preference. EXIT Press MENU to enter the OSD menu. Than press to select the ‘TIME’ menu. MENU EXIT Press OK to select. You can change various time options here. Item Adjustable Standard Omschrijving Time settings • • • • Default Set the various default time settings Time Zone Sleeptimer Auto Standby OSD Timer You select the item you want to change with the buttons.
Lock OK You can select different lock settings that best suits your personal preference. EXIT Press MENU to enter the OSD menu. Than press to select the ‘LOCK’ menu. MENU EXIT Press OK to select. You can change various lock options here. Item Adjustable Standard Omschrijving Lock settings • • • • • • Default Set the different security settings System Lock Set Password Channel Locks Parental Guidance Key Lock Hotel Mode You select the item you want to change with the buttons.
Set Up OK You can select different set up settings that best suits your personal preference. EXIT Press MENU to enter the OSD menu. Than press to select the ‘SET UP’ menu. MENU EXIT Press OK to select.
OK Screen You can select screen settings in PC mode that best suit your personal preference. EXIT Press MENU to enter the OSD menu. Than press to select the ‘SCREEN’ menu. MENU EXIT Press OK to select. You can set various screen settings here. Item Adjustable Standard Description Screen settings • • • • • • Default Set the different ones standard screen settings in PC mode Auto Adjust H-Offset V-Offset Size Phase Position Reset Use the buttons to select the item that you want to change.
DTV Features Favorite List When the source is selected as DTV, users can enter Favorite List by pressing “FAV” button. The “Favorite List” window is illustrated as follows: Press to select favorite list number Program Information When the source is selected as DTV, you can press “display” button to display the channel’s information.
DTV Features Audio Languages When the source is selected as DTV, users can enter in the the Setup menu the ‘Audio Language’ menu. The ‘Audio Language’ window is illustrated, and press button to serve the menu. Subtitle Languages When the source is DTV, users can set the subtitle language at menu (if available). This image is only an example of the languages.
Electronic Program Guide (EPG) Electronic Program Guide (EPG) provides program information which will be broadcasted now or in the future. The system will display EPG window by pressing ‘GUIDE’ button. DATE and TIME information is displayed on the right of the window. The left side shows all channels. The right side shows the programs in the channel. The selected program is also displayed on the top of the screen. Press to select the program. You can press the RED button to enter record mode.
PVR Operation (Personal Video Recorder) OK Press Press EXIT MENU OK to enter the OSD menu. Than press to select the ‘SET UP’ menu. MENU EXIT to select. MENU EXIT You select with the buttons ‘PVR File System’. Then press OK to confirm. You select with the buttons ‘Check PVR File System’. Then press OK to EXIT confirm. Note: The external disk will be formatted, so make sure there are no important files on it.
USB Features Select Media / USB in the ‘SOURCE’ menu. Photo EXIT Press to select ‘PHOTO’. Press the OK button toMENU confirm the selection. Press the buttons to select the disk drive or file that you want to see. Press MENU EXIT toMENU confirm the selection. PressOKthe EXIT button the OK button to return to the previous step or menu. It works the same for Music, Photo and Folder. NOTE: The images related to the function are for reference only.
Specifications tekst RGB-input Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (KHz) VGA 640 x 480 31.5 60 DOS SVGA XGA WXGA 720 x 400 31.5 800 x 600 37.9 1.024 x 768 48.4 70 60 60 1.920 x 1.080 67.5 60 Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (KHz) 480i 720 x 480i 15.73 59.94/60 31.47 59.94/60 HDMI-input VGA 576i 640 x 480 31.47 59.94 720 x 576i 15.63 576p 720 x 576p 720p 1.280 x 720p 1.080i 1.920 x 1.080i 1.080p 1.920 x 1.
Troubleshooting tekst Before contacting our service department you can go through the following for possible solutions. Problem Solution No picture, no sound • Check the cable between TV and antenna/external AV device. • Press the power button on the remote. • Press the SOURCE button the remote, then press the button repeatedly to select the TV source.
Troubleshooting tekst USB files are played jerkily • The speed of the USB storage device can affect the speed of data transfer to the TV, preventing image and / or sound from being smoothly displayed. The TFT LED panel uses a panel consisting of sub pixels which requires sophisticated technology to produce. However, there may be a small number of bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
Useful Information tekst and Licences Guarantee We regret it when a HKC product doesn’t work as it should, despite our careful quality control. That is why we offer a 2-year manufacturer’s warranty after the date of purchase on all our models. This guarantee is a pick-up and return guarantee. This means that we take care of the return of the product to our repair and service center. We will thoroughly check the product and solve the problem. We will send the product back to your home within 7 working days.
Useful Information tekst and Licences EC directives internet address: https://eur-lex.europa.eu/browse/summaries.html?locale=en The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
About HKC The HKC brand was established in 1997 as a manufacturer of PC monitors thanks to the good quality and specific technical production process. HKC quickly grew into a TOP 3 Producer of monitors on the Chinese market. In 2003 HKC started producing LCD televisions, over the years, HKC has bought many suppliers which now makes all parts of the TV in-house, so HKC has one of the only open-cell assembly lines where the LCD of the TV is made.
