Operation Manual

tekst

Before contacting our service department you can go through the following for

possible solutions.

Problem Solution

TV will not turn on • Make sure the power cord is

plugged in.

• The batteries in the remote control

may be drained; replace the

batteries.

No picture, no sound • Check the cable between TV and

antenna/external AV device.

• Press the power button on the

remote.

• Press the SOURCE button the

remote, then press the

 button

repeatedly to select the TV source.

Poor picture, sound OK • Check the cable between TV and

antenna/ external AV device.

• Try another channel, the station may

have broadcast difculties.

• Adjust the brightness/contrast in the

Video menu.

• Check that the unit is set to PAL

Audio noise • Check if the cables are connected

properly.

• Move any infrared equipment away

from the TV.

No audio • Make sure the volume is not turned

off or set to minimum.

Photos, videos and music from a USB

device are not displayed

• Check if the USB storage device

is capable of mass storage, as

described in the documentation that

came with the storage device.

• Check if the USB storage device is

compatible with the TV

• Check if the audio and image le

formats are supported by the TV.

Troubleshooting