Operation Manual

11-2
11.2 Ventilation
11.3 Upkeep
For safety reasons, the spare parts
for heating devices must conform
with the manufacturer's instructions.
They must be installed by the manu-
facturer or an authorised representa-
tive.
Rules for greasing and oiling:
• Have the swinging lever bearings greased
after every 2,000 to 3,000 kilometers driven.
• Grease the bearing spaces on the casing of
the overrunning system.
• Oil movable parts such as bolts and joints.
• Grease the movable parts of the overrunning
system after every 5,000 kilometers driven.
• Check to see that the stationary parts of the
shearing rod are not jammed.
• Clean and oil all movable and stationary parts
at regular intervals.
Sufcient ventilation and de-aeration of the vehi-
cle interior is essential to maintaining a com-
fortable climate. In addition, corrosion damage
from sweat residue can be avoided.
Sweat residue forms most readily
- in tight spaces,
- from the breath and perspiration of the passen
gers,
- by carrying in damp clothing,
- when operating the gas cooker.
Ensure sufcient air circulation to
prevent damage from the collection
of sweat residue!
Cleaning the exterior
The vehicle should not be washed more often
than necessary.
Only wash the vehicle at specially
designed wash sites.
Use cleaning solvents as sparingly
as possible. Aggressive cleaners
such as rim cleaner pollute our
environment.
Do not use cleaners which contain
solvents.