Operation Manual

04-6
Tire repair kit
Do not use the tire repair kit if the tire
was damaged as a result of driving
without air. Small cuts, especially in
the tire tread, can be resealed using
the tire repair kit. Do not remove
foreign objects (such as screws or
nails) from the tire. The tire repair kit
can be used as long as the outside
temperature is approx. -30° C or
higher.
• Lower the jack and remove it.
• Tighten the wheel fatening screws evenly
with the wheel wrench. The nominal value of
the attachment torque is 110 nm for steel rims
and 120 nm for aluminium rims.
• Release the handbrake and reactivate the
stabilization system.
You should have a functional spare
tire available at all times. Therefore,
have the spare tire replaced without
delay.
A Shake the bottle. Open the ll hose (1) on the
bottle (foil seal is thereby punctured).
B Unscrew the valve cap from the tire valve.
Remove the valve insert (2) with the valve-
core remover (3). Do not lay the valve insert
(2) down in sand or dirt.
C Pull the stopper (4) from the ll hose (1). Push
the ll hose onto the tire valve.