Operation Manual

04-7
D Hold the bottle down with the lling tube and
then press them together. Press the entire
bottle contents into the tire. Pull the ll hose
off (1) and screw the valve insert (2) tightly
into the tire valve with the valve-core remover
(3).
E Open the air hose (5) on the tire valve. Insert
the plug (6) into the cigar lighter socket.
Then pump the tires (Fig. 7). do not operate
the electric air pump longer than 8 minutes!
Danger of overheating! If sufcient air pres-
sure is unattainable, drive 10 meters (either
forward or in reverse) so that the sealant
can be evenly distributed within the tire.
Repeat the pumping process. Resume driving
immediately, so that the sealant can be evenly
distributed within the tire.
Maximum speed: 80 km/h. Drive carefully,
especially in curves.
Check tire pressure after driving 10 minutes.
If the tire pressure has fallen under this
minimum value (8), you may not drive any
further.
If the minimum value is still indicated (8),
correct the tire pressure according to the tire
pressure table in the gas bottle container.
Drive carefully to the nearest mechanic and
have the tire replaced.
Danger of accidents! If the required
tire pressure is still unattainable, the
tire is too severely damaged. In this
case, the tire repair kit can no lon-
ger provide an effective seal. There-
fore, do not drive any further. Notify a
service station or the 24-hour service
hotline.
F Adhere the provided sticker to the combinati-
on instrument within sight of the driver. Dispose
of used tire repair kit at a service station.
Danger of accidents! Have the tires
replaced at the nearest service sta-
tion.