manual

shall land the model airplane immediately with throttle controlled with a lower position.
Please pay attention to the following safety information when using.
Never disassemble any electro components in the ESC by yourself, or permanent damages or lost of
information will occur.
Check the setting of receiver. Do not install propeller or small driving gear on motor if you haven t confirm
that the setting of receiver is correct when test the ESC and motor for the first time.
Do not use cracked or broken battery pack.
Do not use battery pack easily get overheat.
Do not use short-cut battery.
Do not use cable insulation material against standards.
Do not use cable connector against standards.
The number of battery or servo system shall not exceed the rules for ESC.
The voltage of battery shall not exceed the scope of working voltage of ESC.
Pay attention to the polarities of battery. Wrong polarities will damage the ESC.
Be sure that the ESC will not use in manned craft or other manned machines.
Do not place the ESC in moist or over exposure.
Do not take out battery when the motor is working, for the generated large peak current will damage the
ESC.
Do not pack anything outside the ESC. Install the ESC in places with good ventilation and heat dissipation
as far as possible.