HBZ3100 HobbyZone Mini Apprentice S Manual

RTF

Mini Apprentice

Service of Power Components

CAUTION: Always disconnect the ﬂ ight battery from

the model before removing the propeller.

Disassembly

1. Remove the screw (A) and spinner (B) from the

spinner backplate (C).

2. Remove the hex nut (D), propeller (E), and the

spinner backplate from the collet (F). A tool will

be required to remove the hex nut.

3. Carefully remove 3 screws (G) and the cowling (H)

from the fuselage.

4. Remove the collet from the motor (I).

5. Remove 4 screws (J) from the motor mount (K)

and the fuselage.

6. Disconnect the motor connectors from the ESC

connectors.

7. Remove 4 screws (L) to remove the motor from the

motor mount.

Assembly Tips

Assemble in reverse order.

• Correctly align and connect the motor wire colors with

the ESC wires.

• The propeller size numbers (8.25 x 5.5) must face out

from the motor for correct propeller operation.

• A tool is required to tighten the hex nut on the collet.

• Ensure the spinner is fully connected to the spinner

backplate for safe operation.