LED Moving Head Spot USER MANUAL KEEP THIS MANUAL FOR FUTURE NEEDS 1
Dimmng Linging Pan/Tilt Speed Model Dim Modes 000-007 008-015 016-131 132-139 140-181 182-189 190-231 232-239 240-247 248-255 000-255 000-255 000-069 070-079 080-089 090-099 100-109 110-119 120-199 200-209 210-249 250-255 000-020 021-040 041-060 061-080 081-100 101-255 ON OFF Dimming-slow-fast OFF Fast-ON Slow-OFF OFF Fast-OFF Slow-ON OFF Dimming OFF 0~100% Fast-Slow when Pan Tilt moving lighting-ON when Color lighting-ON moving when Gobo lighting -ON moving 5 7 A CAUTION! Keep this device away 6
2 Please check carefully that there is no damage caused by transportation. Should there be any, please consult your dealer and don’t install this device. 2 Mounting and installation 2.1 Cautions: for added protection mount the fixyures in areas outside walking paths ,seating areas,or in areas were the fixture might be reached by unauthorized personnel. Before mounting the fixture to any surface ,make sure that the installation area can hold a minimum point load of 10 times the device’s weight.
Notic:Automatic lock screen Don't select the menu operation, after 30 seconds, automatic lock screen; Long press menu button for 3 seconds, is unlocked. 2.4 DMX-512 control connection Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the moving head. You can chain multiple Moving head together through serial linking. The cable needed should be two core, screened cable with XLR input and output connectors.
installation material and the fixture. If you lack these qualifications , Do not attempt the installation yourself ,improper installation can result in bodily injury. Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet. 2.
