Specification

Table Of Contents

See Dim "E"

See Dim "F"

See Dim "D"

See Dim "A"

See Dim "B"

See Dim "C"

#266 Shown

Scale: None

Model #'s 266 thru 269 can be used as a top mount or suspension hanger, e.g., from

a joist or cross-member, or from a HOLDRITE Stout Bracket®. These models are

used for securing and retaining tubing while providing superior acoustical isolation

between the tubing and the supporting structure. Supports 1/2", 3/4", 1" & 1-1/4"

CTS tube sizes. Supports Copper, PEX, CPVC tubing, conduit, etc. UPC listed.

Product Information:

Material:

•

Shell: Polypropylene, blue, FR UL94-V2

Isolators: TPR, natural (off-white), 40 to 45 shore A

Temperature Range: -10

F to 140

F (suspension)

•

Load rating: 25 pounds in suspension mode

•

IAPMO UPC / IPC listed

•

IAPMO listed, per standard PS42-2013

•

800-321-0316 OR 760-744-6944 / FAX: 760-744-0507 / WWW.HOLDRITE.COM

spec_266 thru 269_RevA

THIS INFORMATION IS PROPRIETARY TO HOLDRITE AND IS SUBJECT

TO CHANGE WITHOUT NOTICE. IT MAY NOT BE REPRODUCED IN

PART OR WHOLE WITHOUT WRITTEN AUTHORIZATION.

PAGE 1
See Dim "E" See Dim "D" See Dim "F" See Dim "C" #266 Shown See Dim "B" Scale: None See Dim "A" Model #'s 266 thru 269 can be used as a top mount or suspension hanger, e.g., from a joist or cross-member, or from a HOLDRITE Stout Bracket®. These models are used for securing and retaining tubing while providing superior acoustical isolation between the tubing and the supporting structure. Supports 1/2", 3/4", 1" & 1-1/4" CTS tube sizes. Supports Copper, PEX, CPVC tubing, conduit, etc. UPC listed.