Manual

2
Section 2. Scale Operation
Fig. 1 DS100 Front Panel
Display Functions
The Model DS100 controls consist of GROSS/NET, TARE, ZERO (ON/OFF),
UNITS and PRINT buttons located under to the LED display. The display is used
to provide weight indications and operator messages describing scale operation.
Power
The DS100 is powered by an AC wall transformer. Turn the scale off by pressing
and holding the ZERO (ON/OFF) button for three seconds. Turn the scale on by
pressing the ZERO (ON/OFF) button.
Units Select
Press the UNITS button to change weight display units from lb, lb:oz, oz, kg, g.
The units annunciator to the right of the LED display will indicate the current
weight.
Print
To transmit the selected print string through the standard RS-232 port, press
PRINT. This will cause the selected print string to be printed. The scale will not
transmit while the scale is in motion. If the scale is in motion when the PRINT
button is pressed, the DS100 will transmit the selected print string once the scale
becomes stable.
Motion
Motion is indicated by the MOT annunciator to the left of the LED display.