DORAN PLATFORM SERIES SETUP AND SERVICE MANUAL DORAN SCALES 1315 PARAMOUNT PKWY BATAVIA, IL. 60510 (800) 262-6844 (630) 879-1200 FAX: (630) 879-0073 MAN0011 Rev. 7.
1. INTRODUCTION Congratulations! You have chosen the highest quality stainless steel or mild steel platform available today. The Doran Platform Series provides you, the user, with the ultimate in scale durability and flexibility. The combination of the rugged construction and high quality, water resistant load cell is designed to provide the highest degree of accuracy while maintaining the durability necessary to hold up to hostile industrial environments.
Carefully remove the scale platform and the platter from the shipping carton. Be sure to retain the shipping carton and all packing material in case reshipment is required. When choosing a location for the scale platform, keep in mind that the spot should be on a sturdy horizontal surface that is free of vibration and air currents. Vibration from heavy equipment or appliances and air currents from fans, heating ducts, etc. . can cause bounce on the scale display.
Model Size (in) Capacity (lb) DSP3050 DSP3100 DSP3150 DSP3200 DSP3300 18x18 18x18 18x18 18x18 18x18 50 100 150 200 300 50 100 150 200 300 0.9 0.9 0.9 0.9 0.9 DSP5050/1824 DSP5100/1824 DSP5200/1824 DSP5300/1824 DSP5500/1824 DSP51000/1824 18x24 18x24 18x24 18x24 18x24 18x24 50 100 200 300 500 1000 50 100 200 300 500 1000 0.9 0.9 0.9 0.9 0.9 0.
4. LOAD CELL CABLE LEGEND The following legend describes the load cell cable color code with the description of each colored wire in the cable. Please note that it is important to make sure that the scale platform is electrically connected to earth ground either through the load cell cable shield (via the lug terminated green wire) or by directly connecting the scale platform to earth ground with an additional wire. This will reduce static and other noise from being induced into the indicator.
PLATFORMS LIMITED WARRANTY STATEMENT DORAN SCALES, INC. warrants its products to be free from defects in material and workmanship for a period of two (2) years from date of shipment. Any product found to be defective within this time period may be returned to DORAN’s factory, freight prepaid, with prior return authorization for repair or replacement at no charge.