User Manual

60 SERIES I NDICATORS
6
Figure 9: 660 Series Keypad
ZERO Press [ZERO] to zero the current quantity/weight reading.
When the meter is at Center Zero center-of-zero indication
will appear on the upper line of the dot matrix display. If a
Custom Unit’s name is greater than 2 characters, the Center
Zero indication is not displayed. If in the quantity mode,
pressing [ZERO] will set the current mode to a gross zero
quantity. If in the Weigh Mode, pressing [ZERO] sets the
current mode to Gross Weight.
UNITS
Pressing [UNITS] from the Weigh Mode will toggle the
displayed units through the available selections. Converted
units are automatically rounded to the appropriate
increment.
SELECT Pressing [SELECT] will toggle you through the Net
Weight, Tare Weight and Gross Weight or other enabled
operating modes.
TARE Pressing [TARE] by itself will perform an auto-tare. A Net
Zero is then displayed. You can enter a known Tare weight
by keying in the number and pressing [TARE]. In either
case, the indicator will be placed in the Net Mode, unless
you are in the Tare Mode.
ENTER/YE
S
Press the [ENTER] key following certain numeric entries.
Doubles as a [YES] key for answering operator prompts.
PRINT
Press to send data to a printer, computer or other device.
ID
Used for entering ID numbers.
[F1c] The [F1c] key is used as an up arrow key for scrolling or
as a function key (such as accessing a menu or starting a
process). Not available on Model 460.